DescriptionThe SP3220E devices are RS-232 driver/receiver solutions intended for portable or hand-held applications such as palmtop computers, instrumentation and consumer products. These devices incorporate a high-efficiency charge-pump power supply that allows the SP3220E devices to deliver true RS-232 performance from a single power supply ranging from +3.0V to +5.0V. This charge pump requires only 0.1μF capacitors in 3.3V operation. The ESD tolerance of these devices is over ±15kV for both Human Model and IEC1000-4-2 Air discharge test methods. All devices have a low-power shutdown mode where the driver outputs and charge pumps are disabled. During shutdown, the supply current falls to less than 1μA.
For technical support or help choosing a product please email Exar’s Serial Technical Support group at: firstname.lastname@example.org.
- Meets All EIA-232 and ITU V.28 Specifications from a wide +3.0V to +5.5V power supply
- Interoperable with RS232 and V.28 at 2.7V
- Supports High Serial Data Rates: 120 kbps SP3220E
- 1μA Low Power Shutdown Mode
- Footprint Compatible with MAX3221E, ISL3221
- 4 x 0.1μF External Charge Pump Capacitors
- Tri–State/Receiver Enable
- Improved ESD Specifications:
- ±15kV Human Body Model
- ±15kV IEC1000-4-2 Air Discharge
- ±8kV IEC1000-4-2 Contact Discharge
Parts & Purchasing
|Part Number||Pkg Code||RoHS||Min Temp||Max Temp||Status||Buy Now||Order Samples|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
|07/11/2017||Product Discontinuation Notification||PDN_17-0626-02-1033.pdf|
|05/10/2017||Qualification of alternate assembly subcon, JCET.||PCN 17-0208-03 JCET-1033.pdf|
|02/23/2017||Qualification of alternate assembly subcon, ANST, China.||PCN 16-1149-02-01 ANST-1033.pdf|
|02/15/2017||Qualification of alternate assembly subcon, ANST.||PCN 16-1149-02 ANST-1033.pdf|
|01/16/2017||Material Change. ANST qualified Mitsui as alternate lead frame supplier for TSSOP16L package, in addition to current qualified lead frame supplier FULL RIVER.||PCN 16-0835-05 Mitsui lead frame-1033.pdf|
|12/22/2016||Qualification of TSMC foundry for 0.25um HV20 process.||PCN 16-0937-03 TSMC-1033.pdf|
|08/11/2016||Qualification of alternate assembly subcon, JCET.||PCN 16-0521-05 JCET-1033.pdf|
|07/26/2016||Product discontinuation notification. Discontinued.||PDN 16-0626-01-1033.pdf|
|02/09/2016||Addition of qualified 6 inch wafer processing line in Silan, in addition to the currently qualified 5 inch wafer processing line.||PCN 15-0727-01 Silan 6 inch-1033.pdf|
|02/05/2016||Alternate assembly site. Addition of an alternate assembly supplier ANST (China)||PCN 15-1041-01 ANST-1033.PDF|
|07/14/2014||Qualified 0.25um foundry process in TSMC and SSOP 16L in Greatek. Both copper and gold wire bonding processes qualified. Alternate Foundry and Assembly Site.||PCN_13-0834-05-1033.pdf|
|07/03/2013||Addition of qualified 6 inch wafer processing line in Episil, in addition to the currently qualified 5 inch wafer processing line. Other change (foundry 6 inch wafer qualification).||PCN_13-0507-01-1033.pdf|
|05/23/2013||Qualified copper wire bonding assembly in addition to currently qualified gold wire bonding assembly in Carsem. Material change.||PCN_13-0125-02-1033.pdf|
|05/10/2011||Product Discontinuation Notice. Discontinued due to low market demand.||PDN_11-0510-01-1033.pdf|
|01/25/2010||Material Change; Product transfer to a qualified assembly supplier. To enhance production capacity and also to use environmentally friendly Green material.||PCN_10-0107-01-1033.pdf|
|12/14/2009||Material Change. Use environmental friendly Green (halogen free) material and also for standardization.||PCN_09-1109-01-1033.pdf|
|11/07/2008||1. Assembly of 18ld WSOIC will be moved from Unisem-Malaysia to MMS in Shanghai, China which is an alternate qualified supplier. 2. Mold compound is changed from Sumitomo non green 6730B-L to Sumitomo G600. Unisem Corporation is ending the life of this package lead count in their assembly offerings.||PCN_08-1107-01-1033.pdf|
|02/28/2007||Product Obsolescence Letter and Discontinuation Notification. Discontinued.||POL_022807-1033.pdf|
|05/08/2006||Announcing transfer of certain Power Management and Interface Products from Hillview fabrication facility to wafer foundary Episil. See attached Product List Power Management and Interface products as listed are being transfer to external wafer foundry, due to cessation of operations of the sipex Hillview Fabrication manufacturing site||PCN-06-0130-06a-1033.pdf|
|02/02/2006||Announcing transfer of certain Power Management and Interface Products from Hillview fabrication facility to wafer foundary Episil. See attached Product List Power Management and Interface products as listed are being transfer to external wafer foundry, due to cessation of operations of the sipex Hillview Fabrication manufacturing site||PCN-06-0130-06-1033.pdf|
Frequently Asked Questions
For RS-232 it is 50 feet (15 meters), or the cable length equal to a capacitance of 2500 pF, at a maximum transmission rate of 19.2kbps. When we reduce the baud rate, it allows for longer cable length. For Example:
Baud Rate (bps)
Maximum RS-232 Cable Length (ft)
In this example, we looked for XRA1201. When you hover over it, it will turn grey and you can click anywhere in the grey box. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted in yellow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link:
A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers:
Another method to find out if a part is OBS or EOL is to click on SUPPORT:
And then Product Change Notifications
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.