|Information||3.0V to 5.5V RS-232 1-driver/1-receiver with low-power shutdown|
|Supply Voltage (Nom) (V)||3.3, 5|
|No. of Tx||1|
|No. of Rx||1|
|HBM ESD (kV)||15|
|IEC 61000-4-2 Contact (±kV)||8|
|Data Rate (kbps)||120|
|Temperature Range (°C)||0 to 70, -40 to 85|
|Int. Charge Pump||✔|
|No. of Ext Caps||4|
|Nom Cap Value (µF)||0.1|
The SP3220E devices are RS-232 driver/receiver solutions intended for portable or hand-held applications such as palmtop computers, instrumentation and consumer products. These devices incorporate a high-efficiency charge-pump power supply that allows the SP3220E devices to deliver true RS-232 performance from a single power supply ranging from +3.0V to +5.0V. This charge pump requires only 0.1μF capacitors in 3.3V operation. The ESD tolerance of these devices is over ±15kV for both Human Model and IEC1000-4-2 Air discharge test methods. All devices have a low-power shutdown mode where the driver outputs and charge pumps are disabled. During shutdown, the supply current falls to less than 1μA.
- Meets All EIA-232 and ITU V.28 Specifications from a wide +3.0V to +5.5V power supply
- Interoperable with RS232 and V.28 at 2.7V
- Supports High Serial Data Rates: 120 kbps SP3220E
- 1μA Low Power Shutdown Mode
- Footprint Compatible with MAX3221E, ISL3221
- 4 x 0.1μF External Charge Pump Capacitors
- Tri–State/Receiver Enable
- Improved ESD Specifications:
- ±15kV Human Body Model
- ±15kV IEC1000-4-2 Air Discharge
- ±8kV IEC1000-4-2 Contact Discharge
Documentation & Design Tools
|Data Sheets||SP3220E/EB/EU +3.0V to +5.5V RS-232 Driver/Receiver Pair||1.0.3||May 2020||606.1 KB|
|Application Notes||ANI-10, Charge Pump Capacitor Selection Guide for 3V RS-232 Products||B||December 2006||71.8 KB|
|Application Notes||ANI-06, Connecting the SP504 Multiprotocol Transceiver to the 85C30 Universal Enhanced Serial Communications Controller (ESCC)||B||November 2006||52.3 KB|
|Product FAQs||SP3220e FAQ||1.0.0||February 2007||234.9 KB|
|Product Brochures||Interface Brochure||October 2019||1.3 MB|
Quality & RoHS
|Part Number||RoHS | Exempt||RoHS||Halogen Free||REACH||TSCA||MSL Rating / Peak Reflow||Package|
|SP3220ECY-L||N||Y||Y||Y||Y||L1 / 260ᵒC||TSSOP16|
|SP3220ECY-L/TR||N||Y||Y||Y||Y||L1 / 260ᵒC||TSSOP16|
|SP3220EEY-L/TR||N||Y||Y||Y||Y||L1 / 260ᵒC||TSSOP16|
|SP3220ECA-L/TR||N||Y||Y||Y||Y||L2 / 260ᵒC||SSOP16|
|SP3220EEA-L/TR||N||Y||Y||Y||Y||L2 / 260ᵒC||SSOP16|
Click on the links above to download the Certificate of Non-Use of Hazardous Substances.
Parts & Purchasing
|Part Number||Pkg Code||Min Temp||Max Temp||Status||Suggested Replacement||Buy Now||Order Samples||PDN|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
FAQs & Support
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Submit a Technical Support Question As a New Question
For RS-232 it is 50 feet (15 meters), or the cable length equal to a capacitance of 2500 pF, at a maximum transmission rate of 19.2kbps. When we reduce the baud rate, it allows for longer cable length. For Example:
Baud Rate (bps)
Maximum RS-232 Cable Length (ft)
In this example, we looked for XRA1201. Click on part number header or on the link at the bottom of the result. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted with the blue arrow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link. A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers, the legend still present:
Another method to find out if a part is OBS or EOL is to click on SUPPORT at the top:
And then Product Change Notifications:
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.