|Information||3-Driver/3-Receiver Intelligent RS-232 Transceiver with 1.65V-5.5V Interface|
|Supply Voltage (Nom) (V)||3.3, 5|
|No. of Tx||3|
|No. of Rx||3|
|HBM ESD (kV)||15|
|IEC 61000-4-2 Contact (±kV)||8|
|Data Rate (kbps)||250|
|Temperature Range (°C)||-40 to 85|
|Int. Charge Pump||✔|
|No. of Ext Caps||4|
|Nom Cap Value (µF)||0.1|
The XR32330 product is a 3-driver/ 3-receiver RS-232 transceiver featuring a variable low voltage logic interface, down to 1.65V. This product is intended for portable or hand-held applications such as bar code scanners as well as point-of-sales terminals, security and industrial control applications. The XR32330EBER device features slew-rate limited outputs for reduced crosstalk and EMI.
The XR32330 uses an internal high-efficiency charge-pump power supply that requires only four 0.1μF capacitors in 3.3V operation. This charge pump combined with MaxLinear's driver architecture allow the XR32330 to deliver compliant RS-232 performance from a single power supply ranging from +3.0V to +5.5V.
The AUTO ON-LINE® feature allows the device to automatically "wakeup" during a shutdown state when an RS-232 cable is connected and a connected peripheral is turned on. Otherwise, the device automatically shuts itself down drawing less than 1μA.
- 1.65V to 5.5V Logic Interface VL pin
- Small 4mm x 4mm 24-pin QFN package
- AUTO ON-LINE circuitry automatically wakes up from a 1µA shutdown
- Enhanced ESD Specifications
- ±15kV Human Body Model
- ±15kV IEC61000-4-2 Air Discharge
- ±8kV IEC61000-4-2 Contact Discharge
- 250Kbps min transmission rate (speed grade B)
- Meets true EIA/TIA-232-F Standards from a +3.0V to 5.5V power supply
- Regulated Charge Pump yields stable RS-232 Outputs regardless of VCC variations
- -40°C to 85°C ambient operating temperature
- Portable and Hand-Held Equipment
- Industrial and Process Control Equipment
- Point-Of-Sales Equipment
- Building Security and Automation
Documentation & Design Tools
|Data Sheets||XR32330 3-Driver/3-Receiver Intelligent RS-232 Transceiver with 1.65V-5.5V Interface||Rev 1C||February 2020||2.2 MB|
|Product Flyers||Power Management & Interface Products for Cable, Satellite and IP STB/Home Gateway||March 2018||2 MB|
|Product Brochures||Interface Brochure||October 2019||1.3 MB|
Quality & RoHS
|Part Number||RoHS | Exempt||RoHS||Halogen Free||REACH||TSCA||MSL Rating / Peak Reflow||Package|
|XR32330EBERTR-F||N||Y||Y||Y||Y||L2 / 260ᵒC||QFN24 4x4 OPT1|
Click on the links above to download the Certificate of Non-Use of Hazardous Substances.
Parts & Purchasing
|Part Number||Pkg Code||Min Temp||Max Temp||Status||Suggested Replacement||Buy Now||Order Samples||PDN|
|XR32330EBER-F||QFN24 4x4 OPT1||-40||85||OBS||XR32330EBERTR-F|
|XR32330EBERTR-F||QFN24 4x4 OPT1||-40||85||Active||Order|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
FAQs & Support
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Submit a Technical Support Question As a New Question
For RS-232 it is 50 feet (15 meters), or the cable length equal to a capacitance of 2500 pF, at a maximum transmission rate of 19.2kbps. When we reduce the baud rate, it allows for longer cable length. For Example:
Baud Rate (bps)
Maximum RS-232 Cable Length (ft)
In this example, we looked for XRA1201. Click on part number header or on the link at the bottom of the result. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted with the blue arrow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link. A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers, the legend still present:
Another method to find out if a part is OBS or EOL is to click on SUPPORT at the top:
And then Product Change Notifications:
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.