The SP6134H is a 600kHz constant frequency, voltage mode, synchronous PWM step-down controller optimized for high efficiency.
The SP6134H is adequately suited for split plane applications utilizing a low power 5V rail to power the controller circuitry, minimizing power dissipation. Its wide input voltage range of 3V to 15V allows for conversions from the standard 3.3V, 5V, 9.6V and 12V power rails to an output voltage adjustable down to 0.8V. Developed around a wide bandwidth internal amplifier, the SP6134H can accommodate type II and type III compensation schemes.
Protection features include a programmable UVLO, thermal shutdown and output short circuit protection.
The SP6134H is part of a larger family of step-down controllers operating at various switching frequencies up to 1300kHz and input voltages up to 28V. Refer to Exar’s SP6134, SP6132, SP6132H, SP6137 and SP6139 for complete details.
The SP6134H is available in lead free, RoHS compliant, space saving 10-pin MSOP package.
- 3V to 15V step-down achieved using dual Input
- Small 10-PiMSOP package
- 2A to 15A output capability
- Highly integrated design, minimal components
- UVLO detects both VCC and VIN
- Short circuit protection with auto restart
- On-board 1.5Ω sink (2Ω source) NFET drivers
- Programmable soft-start
- Fast transient response
- High efficiency: greater than 94% possible
- Asynchronous startup into a pre-charged output
Parts & Purchasing
|Part Number||Pkg Code||RoHS||Min Temp||Max Temp||Status||Buy Now||Order Samples|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
|07/26/2016||Product discontinuation notification. Discontinued.||PDN 16-0626-01-1033.pdf|
|08/29/2011||Material change: Mold compound and die attach material are changed and the listed parts will be fully Green (halogen-free). Migrating to green environment and material standardization.||PCN_11-0810-01-1033.pdf|
|03/04/2009||Notice of Obsolescence Discontinued by Exar Corporation due to low market demand||PDN_090304-01-1033.pdf|
|01/20/2009||Datasheet Changes Refer to PCN for more details.||PCN_09-0120-01-1033.pdf|
|02/28/2007||Product Obsolescence Letter and Discontinuation Notification. Discontinued.||POL_022807-1033.pdf|
Frequently Asked Questions
In this example, we looked for XRA1201. When you hover over it, it will turn grey and you can click anywhere in the grey box. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted in yellow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link:
A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers:
Another method to find out if a part is OBS or EOL is to click on SUPPORT:
And then Product Change Notifications
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.
Find the product page of the part that you want to get an evaluation board for and click on Parts & Purchasing. Example:
Find the icons under Buy Now or Order Samples:
Click on the Buy Now icon and see who has stock and click on the Buy button:
Alternatively, you can click on the Order Samples
If the icons are missing, then contact Customer Support.