Overview
| Information | 20A PMBus Compatible POL Converter |
|---|---|
| Package | QFN |
| IQ (µA) | |
| Special Features | PMBus interface, SMBALERT#, CAT_FLT# |
| VIN MIN (V) | 3 |
| VIN MAX (V) | 16 |
| # of Outputs | 1 |
| VOUT MIN (V) | 0.5 |
| VOUT MAX (V) | 5.5 |
| Frequency (kHz) | 400 to 1200 |
| Efficiency (%) | |
| Accuracy (%) | 0.5 |
| IOUT (A) | 20 |
| X x Y Package Dimension (mm) | 5 x 4.5 |
| Control Mode | |
| Operating Temperature (°C) | -40 to 125 |
| Peak Switch Current (A) | |
| Startup Voltage (V) |
The MxL7606P, MxL7612P, MxL7620P, and MxL7630P (MxL76xxP family) are compact, high-current step-down intelligent point-of-load
(iPOL) buck regulators. The MxL76xxP devices feature a PMBus® interface supporting high precision telemetry for IIN, VIN, VOUT, IOUT,
PIN, and POUT and dynamic voltage scaling. The MxL76xxP family is rated at 6A, 12A, 20A, and 30A with a wide input voltage range from
2.7V to 16V, which allows for single supply operation from industry standard 3.3V, 5V, and 12V rails.
The MxL76xxP family features a proprietary constant on-time (COT) control scheme to provide extremely fast transient response using
ceramic or electrolytic output capacitors. The control loop also provides excellent line and load regulation.
High frequency operation (up to 2MHz) minimizes inductor and output capacitance, which results in the highest possible power density.
No external compensation circuitry is required, simplifying circuit implementation and reducing overall component count. A selectable
power saving mode allows you to operate in discontinuous mode (DCM) at light current loads, thereby significantly increasing the converter
efficiency.
A host of protection features, including overcurrent, output overvoltage, over temperature, short-circuit, high-side short, and undervoltage
lockout (UVLO) help achieve safe operation under abnormal operating conditions.
- PMBus 1.3.1 interface up to 1MHz
- 1.8V with 3.3V compliance
- SMBALERT# output
- Proprietary fast transient COT control requiring no external compensation
- 400kHz to 2MHz programmable switching frequency
- Selectable FCCM/DCM operation
- 16-bit A/D analog front-end
- High resolution telemetry
- Output overvoltage and overcurrent protection, high-side short protection
- PowerArchitect™ monitoring, control, and configuration software
- 25 MTP write cycles
- Programmable password protection
- VBOOT options:
- Register programming
- MTP
- External voltage
- Compact 4mm x 5.5mm QFN packaging
- Servers
- 5G and wireless backhaul
- Telecom and networking equipment
- Industrial equipment
- FPGA power
- Point-of-Load converters
Documentation & Design Tools
| Type | Title | Version | Date | File Size |
|---|---|---|---|---|
| Product Flyers | MxL7630P, MxL7620P, MxL7612P, MxL7606P Flyer | R01 | March 2022 | 1.3 MB |
Parts & Purchasing
| Part Number | Min Temp | Max Temp | Status |
|---|---|---|---|
| MxL7620P-AQF-R | -40 | 125 | PRE |
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.