SP690

Low Power Microprocessor Supervisory with Battery Switch-Over
Data Sheet

Description

The SP690A/692A/802L/802M/805L/805M are a family of microprocessor (µP) supervisory circuits that integrate the myriad of components required by discrete solutions to monitor power supplies and battery-control functions in µP and digital systems. Devices in the series will significantly improve system reliability and operational efficiency when compared to discrete solutions.

Features

  • Precision voltage monitor:
    • SP690A/SP802L/SP805L at 4.65V
    • SP692A/SP802M/SP805M at 4.40V
  • Reset time delay - 200ms
  • Watchdog timer - 1.6 sec timeout
  • Minimum component count
  • 60µA maximum operating supply current
  • 0.6µA maximum battery backup current
  • 0.1µA maximum battery standby current
  • Power switching
  • 250mA output in VCC mode (0.6Ω)
  • 25mA output in battery mode (5Ω)
  • Voltage monitor for power fail or low battery warning
  • Available in 8-pin SO and DIP packages
  • RESET asserted down to VCC = 1V
  • RESET Threshold:
    • SP690A: 4.65V
    • SP690S: 2.925V
    • SP690T: 3.075V

Application

Design Tools

Symbols & Footprints

Packaging

Pkg Code Details Quantities Dimensions PDF
NSOIC8
  • JEDEC Reference: MS-012
  • MSL Pb-Free: L1 @ 260ºC
  • MSL SnPb Eutectic: n/a
  • ThetaJA: 128.4ºC/W (std); 96.8ºC/W (fused)
  • Bulk Pack Style: Tube
  • Quantity per Bulk Pack: 98
  • Quantity per Reel: 2500
  • Quantity per Tube: 98
  • Quantity per Tray: n/a
  • Reel Size (Dia. x Width x Pitch): 330 x 12 x 8
  • Tape & Reel Unit Orientation: Quadrant 1
  • Dimensions: mm
  • Length: 4.90
  • Width: 3.90
  • Thickness: 1.75
  • Lead Pitch: 1.27
PDIP8
  • JEDEC Reference: MS-001
  • MSL Pb-Free: n/a
  • MSL SnPb Eutectic: n/a
  • ThetaJA: 84.6ºC/W
  • Bulk Pack Style: Tube
  • Quantity per Bulk Pack: n/a
  • Quantity per Reel: n/a
  • Quantity per Tube: 50
  • Quantity per Tray: n/a
  • Reel Size (Dia. x Width x Pitch): n/a
  • Tape & Reel Unit Orientation: n/a
  • Dimensions: inch
  • Length: 0.365
  • Width: 0.250
  • Thickness: 0.130
  • Lead Pitch: 0.100

Parts & Purchasing

Part Number Pkg Code RoHS Min Temp Max Temp Status Buy Now Order Samples
SP690ACN NSOIC8 0 70 OBS
SP690ACN/TR NSOIC8 0 70 OBS
SP690ACN-L NSOIC8 0 70 OBS
SP690ACN-L/TR NSOIC8 0 70 OBS
SP690ACP PDIP8 0 70 OBS
SP690ACP-L PDIP8 0 70 OBS
SP690AEN NSOIC8 -40 85 OBS
SP690AEN/TR NSOIC8 -40 85 OBS
SP690AEN-L NSOIC8 -40 85 Active Order
SP690AEN-L/TR NSOIC8 -40 85 OBS Suggested:
SP690AEN-L
SP690AEP PDIP8 -40 85 OBS
SP690AEP-L PDIP8 -40 85 OBS
SP690AXN NSOIC8 -40 85 OBS
SP690AXN-1 NSOIC8 -40 85 OBS
SP690AXN-2 NSOIC8 -40 85 OBS
SP690AXP PDIP8 -40 85 OBS
SP690AXP-1 PDIP8 -40 85 OBS
SP690AXP-2 PDIP8 -40 85 OBS
Show obsolete parts
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.

Quality Documents

Part Number REACH
SP690ACN-L Download
SP690ACN-L/TR Download
SP690ACP-L Download
SP690AEN-L Download
SP690AEP-L Download
Additional Quality Documentation may be available, please contact customersupport@maxlinear.com.
Distribution Date Description File
03/22/2019 Product Discontinuation Notice
07/11/2017 Product Discontinuation Notification
02/15/2017 Qualification of alternate assembly subcon, ANST.
07/26/2016 Product discontinuation notification. Discontinued.
04/13/2016 Qualification of alternate assembly subcon, JCET.
03/14/2016 Foundry line qualification. Addition of qualified 6 inch wafer processing line in Silan.
07/20/2015 Product discontinuation notification
01/27/2014 Addition of an alternate qualified 8, 14, 16, 40 PDIP assembly site, Greatek, Taiwan. Alternate assembly site.
07/02/2013 Qualification of an alternate qualified PDIP assembly site, Cirtek (Philippines), in addition to the current assembly site, Unisem (Malaysia). Alternate assembly site.
07/02/2013 Qualification of an alternate qualified assembly supplier, ASE Chung-Li (Taiwan) for the 8L NSOIC package using copper wire bonding. Material change and alternate assembly supplier qualified.
03/23/2010 Alternate qualified assembly supplier Capacity enhancement
12/07/2009 Enhancement of NSOIC 8, NSOIC14 and NSOIC16 packages to Green (halogen-free) via Mold Compound & Die Attach Material. Enhance packages to be Green (halogen-free).
02/28/2007 Product Obsolescence Letter and Discontinuation Notification. Discontinued.
10/16/2006 Adding “Note 1: WDI minimum rise/fall time is 1 microsecond.” to “WDI Pulse Width” specification The Schmitt trigger input on the WDI pin may not recognize signals with rise or fall times shorter than 1 microsecond.
02/02/2006 Announcing transfer of certain Power Management and Interface Products from Hillview fabrication and facility to wafer foundary Silan. See attached Product List Power Management and Interface products as listed are being transfer to external wafer foundry, due to cessation of operations of the sipex Hillview Fabrication manufacturing site
02/02/2006 Announcing transfer of certain Power Management and Interface Products from Hillview fabrication and facility to wafer foundary Silan. See attached Product List Power Management and Interface products as listed are being transfer to external wafer foundry, due to cessation of operations of the sipex Hillview Fabrication manufacturing site

Frequently Asked Questions

The best way to determine this is to go to maxlinear.com and type the part into the search function. At or near the top of the results you should see something that looks like:
 
 
 

In this example, we looked for XRA1201. Click on part number header or on the link at the bottom of the result.  This brings you to the product page. For example:

 
 
 

Click on Parts & Purchasing, highlighted with the blue arrow above. The screen changes to:

 
 
 

Notice the status column and the “Show obsolete parts” link.  A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers, the legend still present:

 
 
 

Another method to find out if a part is OBS or EOL is to click on SUPPORT at the top:

 
 
 

And then Product Change Notifications:

 
  
 

Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:

 
 
 

If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.