The SP202E, SP232E, SP233E, SP310E and SP312E devices are a family of line driver and receiver pairs that meets the specifications of RS-232 and V.28 serial protocols. The devices are pin-to-pin compatible with Exar's SP232A, SP233A, SP310A and SP312A devices as well as popular industry standard pinouts. The ESD tolerance has been improved on these devices to over +/-15kV for Human Body Model. This series offer a 120kbps data rate under load, small ceramic type 0.1µF charge pump capacitors and overall ruggedness for comercial applications. Features include Exar's BiCMOS design which allowing low power operation without sacrificing performance. The series is available in lead free packages with commercial and industrial temperature ranges.
For technical support or help choosing a product please email Exar’s Serial Technical Support group at: firstname.lastname@example.org.
- Operates from Single +5 Power Supply
- Meets All RS-232D and ITU V.28 Specifications
- Operates with 0.1uF to 10uF Capacitors
- High Data Rate - 120Kbps Under Load
- Low Power Shutdown -1ua (Typical) < li>
- 3-State TTL/CMOS Receiver Outputs
- Low Power CMOS - 3mA Operation
- Improved ESD Specifications:
- ±15kV Human Body Model
Parts & Purchasing
|Part Number||Pkg Code||RoHS||Min Temp||Max Temp||Status||Buy Now||Order Samples|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
|11/15/2017||Fab transfer including re-design for new foundry process rules. Qualification of TSMC foundry for 0.25um HV20 process. Addendum: Corrected Change Category from Material, Process and Other to Design and Process.||PCN 17-0208-02A-1033.PDF|
|08/10/2017||Qualification of alternate assembly subcon, ANST.||PCN 17-0625-01 ANST-1033.pdf|
|08/07/2017||Fab transfer including re-design for new foundry process rules. Qualification of TSMC foundry for 0.25um HV20 process.||PCN 17-0208-02 TSMC-1033.pdf|
|07/11/2017||Product Discontinuation Notification||PDN_17-0626-02-1033.pdf|
|12/19/2016||Qualification of alternate assembly subcon, ANST, China.||PCN 16-0835-04 ANST-1033.pdf|
|08/12/2016||Addition of an alternate qualified location, JCET, for assembly using copper wire bonding.||PCN 16-0522-03 JCET-1033.pdf|
|11/16/2015||Updated information subsequent to original published PCN 15-0625-02 on 09/29/2015. Addendum: Update to package marking.||PCN 15-0625-02A UPDATE-1033.pdf|
|09/29/2015||Greatek as alternate assembly site Addition of an alternate production site, Greatek, Taiwan for 16L, 24L and 28L SOICW||PCN 15-0625-02 16L-24L-28L SOICW Greatek-1033.pdf|
|09/11/2015||Alternate assembly site Addition of an alternate assembly supplier Greatek in Taiwan.||PCN 15-0625-04 Greatek-1033.pdf|
|01/27/2014||Addition of an alternate qualified 8, 14, 16, 40 PDIP assembly site, Greatek, Taiwan. Alternate assembly site.||PCN 13-0834-02 Greatek 8-14-16-40 PDIP-1033.pdf|
|07/26/2013||5-inch wafer with PSG 10KÅ passivation Material and other (foundry 6 inch wafer qualification) changes.||PCN_13-0507-02-1033.pdf|
|07/02/2013||Addition of an alternate qualified assembly supplier, Carsem (Malaysia) for 14 and 16 lead NSOIC package using copper wire bonding. Material change.||PCN_13-0128-01-1033.pdf|
|09/24/2012||Material Change - Bond wire is changed from gold to copper. To update our manufacturing to be compatible with current industry standards and maintain capacity.||PCN_12-0914-01-1033.pdf|
|01/26/2011||Use 6’’ production line in the Silan, China wafer fabrication. Capacity enhancement.||PCN_11-0117-01-1033.pdf|
|12/07/2009||Enhancement of NSOIC 8, NSOIC14 and NSOIC16 packages to Green (halogen-free) via Mold Compound & Die Attach Material. Enhance packages to be Green (halogen-free).||PCN_09-0911-01-1033.pdf|
|05/19/2009||Notice of Obsolescence Discontinued by Exar Corporation due to low market demand||PDN 081126-01-1033.pdf|
|12/23/2008||ESD rating of +/- 15kV IEC 1000-4-2 Air Discharge and +/-8kV Contact Discharge are removed from the datasheets. Product re-characterization.||PCN_08-1223-01-1033.pdf|
|11/26/2008||Notice of Obsolescence Package Discontinuation Notice||PDN_081126-01-1033.pdf|
|09/29/2008||Product assembly of 14/16/18 lead PDIP families will be transferred from Unisem-Ipoh (Malaysia) to Unisem-Batam (Indonesia). Business consolidation and use of environmental friendly material.||pcn08-0929-01-1033.pdf|
|05/08/2006||Announcing transfer of certain Power Management and Interface Products from Hillview fabrication facility to wafer foundary Episil. See attached Product List Power Management and Interface products as listed are being transfer to external wafer foundry, due to cessation of operations of the sipex Hillview Fabrication manufacturing site||PCN-06-0130-04b-1033.pdf|
|02/12/2006||Announcing transfer of certain Power Management and Interface Products from Hillview fabrication facility to wafer foundary Episil. See attached Product List Power Management and Interface products as listed are being transfer to external wafer foundry, due to cessation of operations of the sipex Hillview Fabrication manufacturing site||PCN-06-0130-04a-1033.pdf|
|02/02/2006||Announcing transfer of certain Power Management and Interface Products from Hillview wafer fabrication facility to wafer foundry Episil. See attached Product List. Power Management and Interface products as listed are being transfer to external wafer foundry, due to cessation of operations of the sipex Hillview Fabrication manufacturing site||PCN-06-0130-04-1033.pdf|
Frequently Asked Questions
For RS-232 it is 50 feet (15 meters), or the cable length equal to a capacitance of 2500 pF, at a maximum transmission rate of 19.2kbps. When we reduce the baud rate, it allows for longer cable length. For Example:
Baud Rate (bps)
Maximum RS-232 Cable Length (ft)
In this example, we looked for XRA1201. When you hover over it, it will turn grey and you can click anywhere in the grey box. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted in yellow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link:
A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers:
Another method to find out if a part is OBS or EOL is to click on SUPPORT:
And then Product Change Notifications
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.