Universal PMICs

MaxLinear’s universal PMICs with programmable power technology offer advanced dynamic control, telemetry and remote reconfigurability. PowerArchitect design and configuration software speeds development and significantly reduces overall time to market compared to legacy analog power solutions. An I2C interface and multiple GPIO pins ensure easy system integration. Configurable warning and fault levels, fault behavior and power up and down sequencing ensure that any load can be properly powered and protected.
 
These easy to use Universal PMICs provide power solutions for any FPGA, SoC or DSP. Learn more about Xilinx Reference Designs or download Configuration Files for additional power solution reference designs for FPGAs including i.MX6, SmartFusion2, Cyclone V and ARM® Cortex® based processors.
 
Use MaxLinear's design and configuration software, PowerArchitect, to get your design to market faster. Get your free PowerArchitect download.
 
These Universal PMICs can be programmed using programming hardware and software from third-party vendors. For more information, visit our Third Party Support page.


Parametric Search

Filter your results below.

Export
Programmable Power Management System
4
6.5
20
0.9
0.9*Vin
50
Controller
3ohm / 1.8ohm
No
9
0.3 to 1.5
11 bit DPWM
OTP
-40 to 125
TQFN40
High Current Drivers
4
-
Programmable Power Management Systems
4
4.75
25
0.9
0.9*Vin
50
Controller
6ohm / 3ohm
No
9
0.3 to 1.5
11 bit DPWM
OTP
-40 to 125
TQFN40
I2C with PEC
4
-
3x Channel Programmable Power Management
3
4.75
25
0.9
0.9*Vin
50
Controller
6ohm / 3ohm
No
9
0.3 to 1.5
0.3 to 1.5
OTP
-40 to 125
TQFN32
I2C with PEC
4
-
High-Current Programmable Power Management
4
6.5
20
0.9
0.9*Vin
50
Controller
- / -
No
9
0.3 to 1.5
11 bit DPWM
OTP
-40 to 125
TQFN40
-
4
-
Universal PMIC 3 Output Programmable Buck Regulator
3
4.5
14
0.8
6
2.5
Regulator
3A / 2A / 2A
Yes
1.5
0.3-2.2
Current Mode PWM/PSM
EEPROM
-40 to 125
TQFN32
Phase Interleaving
4
-
Five Output Universal PMIC
4
4.0
5.5
3.0V / 1.3V / 0.8V / 0.6V
3.6V / 1.92V / 1.6V / 1.4V
20mV / 20mV / 6.25mV / 6.25mV
Regulator
1.5A / 1.5A / 2.5A / 4A
No
8
1 to 2.1
Current Mode PWM
Factory Only
-40 to 125
QFN32
2 configurable power good outputs; LDO and 2-Input 8-bit ADC, Temp Monitoring, I2C controllable, Supported by Excel configuration tool
Excel Config Tool
MxL7704-A (Sequencing I/O first core last), MxL7704-X (Sequencing for Xilinx® Zynq® Ultrascale+™ ZU2 and ZU3)