G.hn Wave-2 Analog Front End (AFE) for Coax/Phoneline
Order Now


G.hn Access Version Wave-2
Supported G.hn Access EVKs DCP962C, DCP962P
Physical Medium Coaxial, Phone Line
Function Analog Front End
Signal Channels 1
Supported MIMO Modes N/A
Max Net Throughput N/A
Supported G.hn Access Profiles Coaxial 200MHz, Phone Line SISO 200MHz, Phone Line MIMO 100MHz
Data Interfaces N/A
Temperature Range (°C) 0 to 70
Show more

The 88LX2730 is a programmable, high-performance Wave-2 G.hn analog front-end (AFE) for coaxial and phoneline communications. It offers one transmission and reception channel to enable both SISO 200MHz operation using one device and MIMO 100MHz using two devices.
The 88LX2730 AFE is used in the DCP962C G.hn Wave-2 Coaxial Networking Evaluation Kit and in the DCP962P G.hn Wave-2 Phoneline Networking Evaluation Kit.

  • Designed for baseband coaxial and phoneline wireline medium
  • Programmable transmission and reception gains
  • Integrated filters
  • Integrated line driver
  • Powerdown and Standby mode
  • Equalization in reception
  • Impedance sensing support
  • Very low noise and distortion over the entire transmission and reception paths
  • 4mm x 4mm 28-pin QFN package
  • Support for multiple AFEs operating in parallel with only one Digital Baseband (DBB) processor 88LX5153
  • Supported standards:
    • Code of Conduct on Energy Consumption of Broadband Equipment Version 5.0, European Commission
    • ITU-T G.9960, G.9961, G.9962, G.9963, G.9964

  • Coax/Phoneline-to-Ethernet adapter
  • WiFi extender
  • Embedded G.hn modem
  • G.hn Access Multiplexer (GAM)
  • G.hn Distribution Point Units (DPU)

Documentation & Design Tools

Type Title Version Date File Size
Product Flyers G.hn Wave-2 Networking Products May 2020 838.1 KB
Register for a myMxL account or Login to myMxL to view all Technical Documentation & Design Tools.

Parts & Purchasing

Part Number Min Temp Max Temp Status Buy Now
88LX2730A0-NYC2C000 0 70 Active

Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.