CDK1307A
Overview
| # of Channels | 1 |
|---|---|
| Resolution (bits) | 12 |
| Sample Rate (MSPS) | 20 |
| SNR (dBFS) | 72.2 |
| SINAD (dBFS) | 72 |
| SFDR (dBc) | 85 |
| ENOB (bits) | 11.7 |
| DNL | ±0.5 |
| INL | ±1 |
| Power Consumption per ch (mW) | 19 |
| Total Power Dissipation (mW) | 19 |
| Input Type | Diff |
| Architecture | Pipeline |
| Min VS (V) | 1.7 |
| Max VS (V) | 2.0 |
| Temperature Range (°C) | -40 to 85 |
| Package | QFN-40 |
The CDK1307 is a high performance ultra low power Analog-to-Digital Converter (ADC). The ADC employs internal reference circuitry, a CMOS control interface and CMOS output data, and is based on a proprietary structure. Digital error correction is employed to ensure no missing codes in the complete full scale range. Two idle modes with fast startup times exist. The entire chip can either be put in Standby Mode or Power Down mode. The two modes are optimized to allow the user to select the mode resulting in the smallest possible energy consumption during idle mode and startup. The CDK1307 has a highly linear THA optimized for frequencies up to Nyquist. The differential clock interface is optimized for low jitter clock sources and supports LVDS, LVPECL, sine wave, and CMOS clock inputs.
- 13-bit resolution
- 20MSPS maximum sampling rate
- Ultra-low power dissipation: 19mW
- 72.6 dB SNR at Fin = 8MHz
- Internal reference circuitry
- 1.8V core supply voltage
- 1.7V to 3.6V I/O supply voltage
- Parallel CMOS output
- Pin compatible with CDK1308
- Medical imaging
- Portable test equipment
- Digital oscilloscope
- IF communications
Parts & Purchasing
| Part Number | Pkg Code | Min Temp | Max Temp | Status | Suggested Replacement | PDN |
|---|---|---|---|---|---|---|
| CDK1307AILP40 | QFN40 6x6 | -40 | 85 | OBS |
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
