CDK2307C
Overview
| # of Channels | 2 |
|---|---|
| Resolution (bits) | 12 |
| Sample Rate (MSPS) | 65 |
| SNR (dBFS) | 72.6 |
| SINAD (dBFS) | 71.7 |
| SFDR (dBc) | 81 |
| ENOB (bits) | 11.6 |
| DNL | ±0.3 |
| INL | ±0.6 |
| Power Consumption per ch (mW) | 43 |
| Total Power Dissipation (mW) | 85 |
| Input Type | Diff |
| Architecture | Pipeline |
| Min VS (V) | 1.7 |
| Max VS (V) | 2.0 |
| Temperature Range (°C) | -40 to 85 |
| Package | QFN-64 |
The CDK2307 is a high performance, low power dual Analog-to-Digital Converter (ADC). The ADC employs internal reference circuitry, a CMOS control interface and CMOS output data, and is based on a proprietary structure. Digital error correction is employed to ensure no missing codes in the complete full scale range.Several idle modes with fast startup times exist. Each channel can independently be powered down and the entire chip can either be put in Standby Mode or Power Down mode. The different modes are optimized to allow the user to select the mode resulting in the smallest possible energy consumption during idle mode and startup. The CDK2307 has a highly linear THA optimized for frequencies up to Nyquist. The differential clock interface is optimized for low jitter clock sources and supports LVDS, LVPECL, sine wave and CMOS clock inputs.
- 13-bit resolution
- 65MSPS maximum sampling rate
- Ultra-low power dissipation: 85mW
- 73.1 dB SNR at Fin = 8MHz
- 11.7 bits ENOB
- 1.8V core supply voltage
- 1.7V to 3.6V I/O supply voltage
- Parallel CMOS output
- Medical imaging
- Portable test equipment
- Digital oscilloscope
- IF communications
Parts & Purchasing
| Part Number | Min Temp | Max Temp | Status | Suggested Replacement | PDN |
|---|---|---|---|---|---|
| CDK2307CILP64 | -40 | 85 | OBS |
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
