XR22800

Hi-Speed USB to 10/100 Ethernet Bridge
Order Now

Overview

Information Hi-Speed USB to 10/100 Ethernet Bridge
CPU Interface USB 2.0
Ethernet MAC/PHY (Mbps) 10/100
UART CH 0
Max Data Rate (Mbps) 15
UART Tx/Rx FIFO (Bytes) 1024/1024
Auto Half-Duplex Control
No. of GPIOs 8
I2C Master
HBM ESD (USB) (kV) 15
Supply Voltage Range VCC (V) 4.4 to 5.25
Max UART/GPIO Input Voltage (V) 3.6
Max UART/GPIO Output Voltage (V) 3.6
Temperature Range (°C) -40 to 85
Package QFN-32
Show more

The XR22800 is a Hi-Speed USB 2.0 compound device with an embedded hub and 3 downstream USB functions: 10/100 Ethernet MAC and PHY, multi-master capable I2C controller, and an Enhanced Dedicated GPIO Entity (EDGE) controller.

The upstream USB interface has an integrated USB 2.0 PHY and device controller that is compliant with both Hi-Speed (480Mbps) and Full-Speed (12Mbps) USB 2.0. The vendor ID, product ID, power mode, remotewakeup support and maximum power consumption are amongst the values that can be programmed using the on-chip One-Time Programmable (OTP) memory.

The Ethernet 10/100 MAC and PHY are compliant with IEEE 802.3 and supports auto-negotiation, auto-MDIX, checksum offload, auto-polarity correction in 10Base-T and remote wakeup capabilities.

The multi-master capable I2C controller and EDGE controller (8 GPIOs) can be accessed via the USB HID interface. The EDGE pins or I2C interface can be used for controlling and monitoring other peripherals. Up to 2 EDGE pins can be configured as a PWM generator.


  • USB 2.0 Compliant Interface
  • 10/100 Ethernet MAC and PHY
  • I2C Multi-master
  • Enhanced Dedicated GPIO Entity (EDGE)
  • Single +5.0V Power Supply Input
  • Regulated +3.3V Output Power
  • Single 25MHz Crystal
  • ±15kV HBM ESD Protection on USB data pins
  • ±8kV HBM ESD Protection on all other pins

  • USB to Ethernet Dongles
  • POS Terminals
  • Test Instrumentation
  • Networking
  • Factory Automation and Process Controls
  • Industrial Applications

Download Software Drivers

Documentation & Design Tools

Type Title Version Date File Size
Data Sheets XR22800 Hi-Speed USB to 10/100 Ethernet Bridge 1F October 2019 700.8 KB
Application Notes AN202, USB UART Board Design Considerations for USB Compliance R02 June 2023 2.4 MB
User Guides & Manuals XR2280x USB Ethernet Bridges Design Guide 00 April 2020 2.3 MB
User Guides & Manuals XR22800 Evaluation Board User’s Manual 1A June 2014 1.2 MB
Product Flyers G.hn Industrial IoT Networking Products Flyer September 2021 1.1 MB
Product Flyers Full-Speed USB UART Family 1.1 November 2020 605.3 KB
Schematics & Design Files XR22800 Evaluation Board BRD, RSN Files June 2016 238.9 KB
Schematics & Design Files Evaluation Board Schematic 2.0 February 2016 20.6 KB
Product Brochures Interface Brochure R01 June 2024 3.6 MB
Software: Drivers Windows 11 1.1.0.2 January 2023 42.5 KB
Software: Drivers Windows 10 1.1.0.1 June 2018 78 KB
Software: Drivers Windows XP, Vista, 7 1.1.0.0 December 2017 86 KB
Register for a myMxL account or Login to myMxL to view all Technical Documentation & Design Tools.

Quality & RoHS

Part Number RoHS | Exempt RoHS Halogen Free REACH TSCA MSL Rating / Peak Reflow Package
XR22800IL32TR-F N Y Y Y Y L2 / 260ᵒC QFN32 5x5 OPT3
XR22800IL32-F N Y Y Y Y L2 / 260ᵒC QFN32 5x5 OPT3

Click on the links above to download the Certificate of Non-Use of Hazardous Substances.

Additional Quality Documentation may be available, please Contact Support.

Parts & Purchasing

Part Number Pkg Code Min Temp Max Temp Status Buy Now Order Samples
XR22800IL32-F QFN32 5x5 OPT3 -40 85 Active Order
XR22800IL32TR-F QFN32 5x5 OPT3 -40 85 Active Order
XR22800IL32-0A-EB Board Active

Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.

Packaging

Pkg Code Details Quantities Dimensions
QFN32 5x5 OPT3
  • JEDEC Reference:
  • MSL Pb-Free: L2 @ 260ºC
  • MSL SnPb Eutectic:
  • ThetaJA: 30
  • Bulk Pack Style: Tray
  • Quantity per Bulk Pack: 490
  • Quantity per Reel: 3000
  • Quantity per Tube: n/a
  • Quantity per Tray: 490
  • Reel Size (Dia. x Width x Pitch): 330 x 12 x 8
  • Tape & Reel Unit Orientation: Quadrant 1
  • Dimensions: mm
  • Length: 5
  • Width: 5
  • Thickness: 1.00
  • Lead Pitch: 0.5

Notifications

Distribution Date Description File
07/17/2023 In 2023, MaxLinear will be converting all shipping labels for the parts noted from an EXAR format to MaxLinear’s label. During this transition customers may receive either label. This change affects only shipping and packing labels. This change will not affect the part number, part marking, manufacturing process or manufacturing sites. Only work in progress material will be converted. Existing inventory from MaxLinear’s warehouse, channel sales, distributor, and such, will not be converted. Hence, customers may experience receiving mixed shipments with both Exar and MaxLinear labels for some period until existing inventory of old labels is eventually cleared out. Situation is product to product with no predictable way to determine when all old labels will be exhausted. No change to product form, fit, function and reliability. ADDENDUM A: Fixed MBB label logo for DX204001 to MaxLinear logo. ADDENDUM B: Replaced ‘All other affected products outer box label’ with clearer pictures. Corrected Date Issued (from original PCN) issue date +90 days to August 30, 2023.
06/01/2023 In 2023, MaxLinear will be converting all shipping labels for the parts noted from an EXAR format to MaxLinear’s label. During this transition customers may receive either label. This change affects only shipping and packing labels. This change will not affect the part number, part marking, manufacturing process or manufacturing sites. Only work in progress material will be converted. Existing inventory from MaxLinear’s warehouse, channel sales, distributor, and such, will not be converted. Hence, customers may experience receiving mixed shipments with both Exar and MaxLinear labels for some period until existing inventory of old labels is eventually cleared out. Situation is product to product with no predictable way to determine when all old labels will be exhausted. No change to product form, fit, function and reliability.
06/01/2023 In 2023, MaxLinear will be converting all shipping labels for the parts noted from an EXAR format to MaxLinear’s label. During this transition customers may receive either label. This change affects only shipping and packing labels. This change will not affect the part number, part marking, manufacturing process or manufacturing sites. Only work in progress material will be converted. Existing inventory from MaxLinear’s warehouse, channel sales, distributor, and such, will not be converted. Hence, customers may experience receiving mixed shipments with both Exar and MaxLinear labels for some period until existing inventory of old labels is eventually cleared out. Situation is product to product with no predictable way to determine when all old labels will be exhausted. No change to product form, fit, function and reliability. ADDENDUM: Fixed MBB label logo for DX204001 to MaxLinear logo.
01/31/2022 To increase manufacturing capacity, MaxLinear has qualified UTL3 extension site as an alternate assembly site together with UTL1 for QFN and DFN products.
10/08/2021 In addition to the currently qualified UTAC, Thailand site, MaxLinear has qualified ANST, China, as an alternate site for assembly and test for the devices noted above. There is no change to datasheet, form, fit or function of the devices.
07/21/2017 Qualification of alternate assembly subcon, ANST.
07/11/2017 Product Discontinuation Notification
01/31/2017 Addition of qualified 12 inch wafer processing line in Global Foundries, in addition to the currently qualified 8 inch wafer processing. Note: Reliability report will be available February 17, 2017.
01/27/2017 Qualification of alternate assembly subcon, ANST, China.