|Information||Hi-Speed USB to 10/100 Ethernet Bridge|
|CPU Interface||USB 2.0|
|Ethernet MAC/PHY (Mbps)||10/100|
|Max Data Rate (Mbps)||15|
|UART Tx/Rx FIFO (Bytes)||1024/1024|
|Auto Half-Duplex Control||✔|
|No. of GPIOs||8|
|HBM ESD (USB) (kV)||15|
|Supply Voltage Range VCC (V)||4.4 to 5.25|
|Max UART/GPIO Input Voltage (V)||3.6|
|Max UART/GPIO Output Voltage (V)||3.6|
|Temperature Range (°C)||-40 to 85|
The XR22800 is a Hi-Speed USB 2.0 compound device with an embedded hub and 3 downstream USB functions: 10/100 Ethernet MAC and PHY, multi-master capable I2C controller, and an Enhanced Dedicated GPIO Entity (EDGE) controller.
The upstream USB interface has an integrated USB 2.0 PHY and device controller that is compliant with both Hi-Speed (480Mbps) and Full-Speed (12Mbps) USB 2.0. The vendor ID, product ID, power mode, remotewakeup support and maximum power consumption are amongst the values that can be programmed using the on-chip One-Time Programmable (OTP) memory.
The Ethernet 10/100 MAC and PHY are compliant with IEEE 802.3 and supports auto-negotiation, auto-MDIX, checksum offload, auto-polarity correction in 10Base-T and remote wakeup capabilities.
The multi-master capable I2C controller and EDGE controller (8 GPIOs) can be accessed via the USB HID interface. The EDGE pins or I2C interface can be used for controlling and monitoring other peripherals. Up to 2 EDGE pins can be configured as a PWM generator.
- USB 2.0 Compliant Interface
- 10/100 Ethernet MAC and PHY
- I2C Multi-master
- Enhanced Dedicated GPIO Entity (EDGE)
- Single +5.0V Power Supply Input
- Regulated +3.3V Output Power
- Single 25MHz Crystal
- ±15kV HBM ESD Protection on USB data pins
- ±8kV HBM ESD Protection on all other pins
- USB to Ethernet Dongles
- POS Terminals
- Test Instrumentation
- Factory Automation and Process Controls
- Industrial Applications
Documentation & Design Tools
|Data Sheets||XR22800 Hi-Speed USB to 10/100 Ethernet Bridge||1F||October 2019||700.8 KB|
|Application Notes||AN202, USB UART Board Design Considerations for USB Compliance||R02||June 2023||2.4 MB|
|User Guides & Manuals||XR2280x USB Ethernet Bridges Design Guide||00||April 2020||2.3 MB|
|User Guides & Manuals||XR22800 Evaluation Board User’s Manual||1A||June 2014||1.2 MB|
|Product Flyers||G.hn Industrial IoT Networking Products Flyer||September 2021||1.1 MB|
|Product Flyers||Full-Speed USB UART Family||1.1||November 2020||605.3 KB|
|Schematics & Design Files||XR22800 Evaluation Board BRD, RSN Files||June 2016||238.9 KB|
|Schematics & Design Files||Evaluation Board Schematic||2.0||February 2016||20.6 KB|
|Product Brochures||Interface Brochure||November 2023||3.7 MB|
|Software: Drivers||Windows 11||220.127.116.11||January 2023||42.5 KB|
|Software: Drivers||Windows 10||18.104.22.168||June 2018||78 KB|
|Software: Drivers||Windows XP, Vista, 7||22.214.171.124||December 2017||86 KB|
Quality & RoHS
|Part Number||RoHS | Exempt||RoHS||Halogen Free||REACH||TSCA||MSL Rating / Peak Reflow||Package|
|XR22800IL32TR-F||N||Y||Y||Y||Y||L2 / 260ᵒC||QFN32 5x5 OPT3|
|XR22800IL32-F||N||Y||Y||Y||Y||L2 / 260ᵒC||QFN32 5x5 OPT3|
Click on the links above to download the Certificate of Non-Use of Hazardous Substances.
Parts & Purchasing
|Part Number||Pkg Code||Min Temp||Max Temp||Status||Buy Now||Order Samples|
|XR22800IL32-F||QFN32 5x5 OPT3||-40||85||Active||Order|
|XR22800IL32TR-F||QFN32 5x5 OPT3||-40||85||Active||Order|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.