Long established in the E1 arena, Exar proves again it has the right combination of design expertise and market knowledge to bring innovative products to market. The XRT83SL28 (Eight channel E1 LIU) join several other E1 AFEs and LIUs to give designers a multitude of architecture combinations to meet, or exceed their OEM market requirements. This new E1 device, coupled with an already extensive product line including three seven-channel AFEs (XRT5897, XRT5997 and XRT81L27), several four-channel devices (XRT5894, XRT5793, XRT5794, and XRT82L24), plus three single-channel parts (XRT59L91, XRT7288 and XRT82D20), give EXAR a distinct marketplace advantage. This new product, along with Exar's other E1 LIUs and AFEs give customers a clear and rich product family spanning DS1/E1 to SONET/SDH. Applications for these new devices include multiplexers (PDH and SDH), digital cross connects, DECT (Digital European Cordless Telephone) base stations, and CSU/DSU equipment.Overview of Products
The XRT83SL28 contains eight independent E1 channels, including independent jitter attenuators and data and clock recovery circuits for each channel. Each channel also performs the driver and receiver functions necessary to convert bipolar signals to logical levels, as well as the reverse. Devices with eight E1 channels provide the most efficient method of implementing 16-channel and 32- channel line cards.
Exar's R3 TechnologyTM (Reconfigurable, Relayless Redundancy), first introduced in 2002 as a breakthrough capability delivering key benefits to customers designing interface cards has now been extended to the E1 environment. The devices are Reconfigurable with integrated termination supporting both 75 and 100 W line impedances enabling customers to build one board with a single bill-of-materials, and gives them the agility to quickly respond and reconfigure devices for compressed design cycles without the unnecessary stock piling of inventory for all configurations. In addition, the XRT83SL28 employs Relayless Redundancy eliminating the need for external relays for 1:1 and 1+1 applications by establishing a back-up channel that can be brought on-line in the event of failure.
- Eight independent E1 (CEPT) line interface units (transmitter and receiver) in one chip
- Generates transmit output pulses that are compliant with the ITU-T G.703 pulse template for 2.048Mbps (E1) rates
- On-chip pulse shaping
- Compliant with ITU-T G. 838 jitter tolerance requirements
- Declares and clears Loss of Signal (LOS) meeting ITU
- G.775 standards
- Ultra low power dissipation
- Low power 3.3V operation
- Functions over industrial temperature range
- Pb-Free, RoHS Compliant Versions Offered
- TAN-056, High Impedance Drivers During Power Failure Using XRT83SL3X/L3X LIU
- TAN-067, R3 Technology For T/E Carrier Redundancy Applications
- TAN-058, DS-1/E1 GR-1089 Surge Protection
- TAN-057, DS1/E1 Layout Recommendations
- TAN-059, DS-1/E1 Line Recovered Clock PLL Timing
- TAN-200, Exar APIs - OS Portability
- PDH multiplexers
- SDH multiplexers
- Digital cross-connect systems
- DECT (Digital European Cordless Telephone) base stations
- CSU/DSU equipment
Parts & Purchasing
|Part Number||Pkg Code||Min Temp||Max Temp||Status||Buy Now||Order Samples|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Quality & Environmental Data
|Part Number||RoHS | Exempt||RoHS||Halogen Free||REACH||MSL Rating / Peak Reflow||Package|
|XRT83SL28IV-F||N||Y||Y||Y||L3 / 260ᵒC||LQFP144|
Click on the links above to download the Certificate of Non-Use of Hazardous Substances.
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Frequently Asked Questions
In this example, we looked for XRA1201. Click on part number header or on the link at the bottom of the result. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted with the blue arrow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link. A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers, the legend still present:
Another method to find out if a part is OBS or EOL is to click on SUPPORT at the top:
And then Product Change Notifications:
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.
Submit a Technical Support Question As a New Question