Overview
Information | High Performance DUART with 64-Byte FIFO |
---|---|
Data Bus Interface | Intel |
# of Channels | 2 |
Max Data Rate 5V (Mbps) | na |
Max Data Rate 3.3V (Mbps) | 16 |
Max Data Rate 2.5V (Mbps) | 12.5 |
Max Data Rate 1.8V (Mbps) | 8 |
Tx FIFO (Bytes) | 64 |
Rx FIFO (Bytes) | 64 |
Auto Flow Control | ✔ |
Auto RS-485 Half-Duplex Control | ✔ |
Multidrop (9-bit) Mode | |
Fractional Baud Rate Generator | ✔ |
Power Down Mode | ✔ |
Supply Voltage Range VCC (V) | 1.62 to 3.63 |
Auto RTS/CTS | ✔ |
Package | TQFP-48 |
FIFO Level Counters | ✔ |
Selectable/ Programable Trigger Levels | P |
IrDA Sup | ✔ |
5V Tolerant Inputs | |
Max UART/GPIO Input Voltage (V) | VCC |
Max UART/GPIO Output Voltage (V) | VCC |
Temperature Range (°C) | -40 to 85 |
The XR16M7521 (M752) is a high performance dual universal asynchronous receiver and transmitter (UART) with 64 byte TX and RX FIFOs. The M752 operates from 1.62 to 3.63 volts. It is pin-to-pin and software compatible to the TL16C752B and SC16C752B, but with additional features such as a programmable fractional baud rate generator, automatic RS-485 half-duplex direction control, infrared mode and 8X and 4X sampling rate. The standard features include 16 selectable TX and RX FIFO trigger levels, automatic hardware (RTS/CTS) and software (Xon/Xoff) flow control, and a complete modem interface. Onboard registers provide the user with operational status and data error flags. An internal loopback capability allows system diagnostics. Each channel is independently programmable for data rates up to 16 Mbps at 3.3 Volt with a 4X sampling rate. The M752 is available in the 48-pin TQFP and 32-pin QFN packages.
NOTE: 1Covered by U.S. Patent #5,649,122- 1.62 to 3.6 Volt Operation
- Pin-to-pin and software compatible to TI's TL16C752B and Philips' SC16C752B in the 48-TQFP package
- Two independent UART channels
- Data rate of up to 16 Mbps at 3.3 V
- Data rate of up to 12.5 Mbps at 2.5 V
- Data rate of up to 8 Mbps at 1.8 V
- Fractional Baud Rate Generator
- Data sampling rates of 16X, 8X and 4X
- Transmit and Receive FIFOs of 64 bytes
- Programmable TX and RX FIFO Trigger Levels
- Automatic Hardware (RTS/CTS) Flow Control
- Automatic Software (Xon/Xoff) Flow Control
- Halt and Resume Transmission Control
- Automatic RS-485 Half-duplex Direction Control Output via RTS#
- Wireless Infrared (IrDA 1.0) Encoder/Decoder
- Automatic sleep mode
- Full modem interface
- Crystal oscillator (up to 24MHz) or external clock (up to 64MHz) input
- 48-TQFP and 32-QFN packages
- Pb-Free, RoHS Compliant Versions Offered
- Portable Appliances
- Telecommunication Network Routers
- Ethernet Network Routers
- Cellular Data Devices
- Factory Automation and Process Controls
Documentation & Design Tools
Type | Title | Version | Date | File Size |
---|---|---|---|---|
Data Sheets | XR16M752/XR68M752 High Performance DUART with 64-Byte FIFO | 1.1.1 | June 2009 | 1.2 MB |
Application Notes | DAN-190, MaxLinear UARTs in RS-485 Applications | R01 | July 2023 | 2.4 MB |
Application Notes | AN-204, UART Sleep Mode | 1.0.0 | June 2010 | 515.8 KB |
Product Flyers | High Performance Low Voltage DUART | 1.0.0 | September 2006 | 283.1 KB |
Product Brochures | Interface Brochure | R01 | June 2024 | 3.6 MB |
Schematics & Design Files | ISA Eval Board Schematic | 2.1.0 | August 2007 | 144.1 KB |
Quality & RoHS
Part Number | RoHS | Exempt | RoHS | Halogen Free | REACH | TSCA | MSL Rating / Peak Reflow | Package |
---|---|---|---|---|---|---|---|
XR16M752IM48-F | N | Y | Y | Y | Y | L3 / 260ᵒC | TQFP48 |
XR16M752IM48TR-F | N | Y | Y | Y | Y | L3 / 260ᵒC | TQFP48 |
Click on the links above to download the Certificate of Non-Use of Hazardous Substances.
Parts & Purchasing
Part Number | Pkg Code | Min Temp | Max Temp | Status | Suggested Replacement | Buy Now | Order Samples | PDN |
---|---|---|---|---|---|---|---|---|
XR16M752IL32-F | QFN32 5x5 OPT3 | -40 | 85 | OBS | XR16M752IM48-F | |||
XR16M752IL32TR-F | QFN32 5x5 OPT3 | -40 | 85 | OBS | XR16M752IM48TR-F | |||
XR16M752IM48-F | TQFP48 | -40 | 85 | Active | Order | |||
XR16M752IM48TR-F | TQFP48 | -40 | 85 | Active | Order |
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Packaging
Pkg Code | Details | Quantities | Dimensions |
---|---|---|---|
TQFP48 |
|
|
|
QFN32 5x5 OPT3 |
|
|
|
Notifications
FAQs & Support
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Submit a Technical Support Question As a New Question
https://www.exar.com/quality-assurance-and-reliability/lead-free-program
The Parts & Purchasing section of the product page shows the Status of all orderable part numbers for that product. Click Show obsolete parts, to see all EOL or OBS products.
Please check that all the following conditions are satisfied first.
- no interrupts pending (ISR bit-0 = 1)
- modem inputs are not toggling (MSR bits 0-3 = 0)
- RX input pin is idling HIGH • divisor (the value in DLL register) is non-zero
- TX and RX FIFOs are empty
Be sure sleep mode bit has been set to 1. If there are multiple UART channels, the sleep conditions must be true for all channels.
See more on Sleep Mode in AN204 UART Sleep Mode.
Yes. Note: some devices do have powersave mode. If UART goes into powersave mode, then the registers are not accessible.
See more on Sleep Mode in AN204 UART Sleep Mode.
Read LSR register to check whether the UART receives the data or not.
- If LSR value is 0x60, it means that either UART receiver FIFO doesn’t receive the data or the data in receiver FIFO has been read out before the read of LSR.
- If LSR value is 0x00, it means data is still in the THR (clock doesn’t oscillate to transmit data).
- If LSR value is 0xFF, it means either UART is in powersave mode or UART is powered off. For those devices with powersave mode, be sure that UARTS are not in powersave mode.
See more on Sleep Mode in AN204 UART Sleep Mode.
- Check whether the register set can be accessed.
- Check whether the crystal is oscillating fully.
- Check whether the data can be transmitted in internal loopback mode.
See more on Sleep Mode in AN204 UART Sleep Mode.
Videos
MxL UARTs Auto RS-485 Direction Control
This video describes how the automatic RS-485 half-duplex direction control feature in MaxLinear UARTs reduces driver development and frees up CPU/MCU loading. This feature eliminates the need to monitor the status of the UART’s transmit shift register and automatically switches MaxLinear RS-485 transceivers from the transmit mode to the receive mode. This video summarizes the content in application note DAN-190.