Overview
Information | Universal (3.3V and 5V) PCI Bus Quad UART |
---|---|
Data Bus Interface | PCI Bus 2.2 |
# of Channels | 4 |
Max Data Rate 5V (Mbps) | 6.25 |
Max Data Rate 3.3V (Mbps) | 4 |
Tx/Rx FIFO (Bytes) | 64/64 |
FIFO Level Counters | ✔ |
Program. Trigger Levels | ✔ |
Auto Flow Control | ✔ |
Auto RS-485 Half-Duplex Control | ✔ |
Fractional Baud Rate Generator | |
Power Down Mode | ✔ |
5V Tolerant Inputs | ✔ |
Supply Voltage Range VCC (V) | 3 to 3.6, 4.5 to 5.5 |
No. of GPIOs | 8 |
PCI Interface Supply Voltage Range VIO (V) | 3 to 3.6, 4.5 to 5.5 |
Max UART/GPIO Input Voltage (V) | 6 |
Max UART/GPIO Output Voltage (V) | VCC |
Temperature Range (°C) | -40 to 85 |
Package | LQFP-144 |
The XR17D152 (dual) and XR17D154 (quad) and XR17D158 (octal) are industry first UARTs to support both 3.3V and 5V Universal PCI Bus signaling designs. A PCI Bus add-in card designed using one of the Universal PCI UART means the card will operate virtually in any PC system, old with 5V and new at 3.3V. PC Add-in card manufacturers can simply build and ship the Universal PCI cards to the distribution channel or customers without having to concern with slot's VIO voltage compatibility.
This multi-channel Universal PCI UART product family is highly integrated and well suited for Universal PCI add-in card solutions. In addition, they support high bandwidth requirements found in communication devices of Point-of-Sale (POS) systems, industrial machineries, computer servers and telecom network management solutions for systems based on PCI Bus, CompactPCI, PMC, VME and PC/104Plus industry standards. These Universal PCI UART devices build on the earlier successful introduction of the 5V devices (XR17C152/154/158, 2/4/8 channels), and 3.3V (XR17L152/154) and will deliver the same product innovations that have been a hallmark of Exar's offerings including: minimized design cycles, increased performance, and acceleration of time-to-market.
Product Highlights
The new series complies with Universal PCI Bus signaling to support designs for old at 5V and new at 3.3V PCI systems. The three devices meet and support the Universal PCI Bus Target signaling speed of up to 33MHz at 3.3V and 5V. The devices support auto-configuration registers for plug-and-play installation. Their 32-bit global interrupt source register offers an at-a-glance status that is capable of identifying which UART channel's transmitter or receiver has requested service. This feature greatly facilitates interrupt parsing and increases service efficiency, hence, eliminates the conventional approach of individually polling each channel. The Universal PCI UART series is capable of operating 4 times faster in data transfer efficiency by its 32-bit data loading and unloading capability than the traditional ISA (8-bit) bus.
In addition, automatic RS-485 direction control with selectable turn-around delay is provided enabling faster polling in 2-wire half-duplex networks. Automatic hardware (RTS/CTS or DTR/DSR) and software flow (Xon/Xoff) control facility is supported to prevent data loss and packet retransmission, hence, increasing throughput.
The 5G register set is compatible to the industry's standard 16C550, providing easy software migration from existing driver codes. Additionally, they support programmable TX and RX FIFO interrupt trigger levels and FIFO level counters to optimize interrupt intervals.
A Universal PCI Bus demonstration add-in card is available now for purchase with schematics and Windows(TM) 2000/NT/XP device driver for evaluation. Furthermore, a Linux device driver is also available now.
Windows is a trademark of Microsoft Corporation.
- Industry First Universal Board PCI Bus UART
- Direct 3.3V and 5V PCI Bus Connection
- PCI Bus Target revision 2.3 Signaling Compliant
- 32-bit Wide Data Read/Write Operation for Higher Data Throughput
- Data Burst Operation for Faster Data Loading/Unloading
- Global Interrupt Signal Register Increases Driver Efficiency
- Each UART has 64-byte TX and RX FIFOs
- Programmable TX and RX FIFO Trigger Level and FIFO Level Counters
- Automatic RTS/CTS or DTR/DSR Hardware Flow Control
- Automatic RS485 Direction Control Output with Selectable turn-around delay
- Up to 6.125 MBps Data Rate
- Pb-Free, RoHS Compliant Versions Offered
- Universal PCI Bus Add-in Cards
- Multi Serial Port Solution
- Terminal Servers
- Point-of-Sale Systems
- Factory Automation Management
- Process Control Machinery
- Data Collection Servers
- Systems Monitoring and Management
- Ethernet to Serial Ports
Documentation & Design Tools
Type | Title | Version | Date | File Size |
---|---|---|---|---|
Data Sheets | XR17D154 UNIVERSAL (3.3V and 5V) PCI BUS Quad UART | 1.2.2 | August 2005 | 1.4 MB |
Application Notes | AN-225, Installing and Testing a PCI/PCIe UART Serial Port Using a Custom MaxLinear Driver in Linux | 1B | July 2018 | 427.1 KB |
Application Notes | AN 209 - Windows & Linux API interface code for PCI/PCIe UARTs’ drivers | December 2011 | 199.5 KB | |
Application Notes | AN-204, UART Sleep Mode | 1.0.0 | June 2010 | 515.8 KB |
Application Notes | DAN-189, MaxLinear UARTs in GPS Applications | 1.0.0 | April 2008 | 139 KB |
Application Notes | DAN-112, PCI UART - EEPROM Interface | June 2003 | 36.8 KB | |
User Guides & Manuals | PCI/PCIe EEPROM Programming Utility User Manual | 1.0.0 | November 2010 | 262.5 KB |
User Guides & Manuals | Evaluation Board User's Manual | 6.5.0 | August 2003 | 16.6 KB |
Software: GUIs & Utilities | PCI UART EEPROM Programming Utility | July 2017 | 10.9 KB | |
Product Brochures | Interface Brochure | R01 | June 2024 | 3.6 MB |
Software: Drivers | Windows 10 | 5.5.0.0 | September 2020 | 319.1 KB |
Software: Drivers | Linux 2.6.32 and newer | 2.6.0.0 | August 2019 | 20.2 KB |
Software: Drivers | Windows XP, Vista, 7, 8, 8.1 | 5.3.0.0 | September 2015 | 275.2 KB |
Software: Drivers | Linux 2.6.37 | 1.0.0 | April 2011 | 13.4 KB |
Software: Drivers | Linux 2.6.31 | 1.0.0 | July 2010 | 12.6 KB |
Software: Drivers | Linux 2.6.21 | 1.0.0 | July 2007 | 13.5 KB |
Software: Drivers | Linux 2.6.18 | 1.0.0 | February 2007 | 13.8 KB |
Software: Drivers | Linux 2.6.16 | 1.0.0 | August 2006 | 13.7 KB |
Software: Drivers | Linux 2.6.8 | 1.0.0 | September 2005 | 13.8 KB |
Software: Drivers | Linux 2.4 | 1.0.0 | April 2002 | 898.6 KB |
Schematics & Design Files | PCI Eval Board Schematic | 9.1 | January 2009 | 119.6 KB |
Quality & RoHS
Part Number | RoHS | Exempt | RoHS | Halogen Free | REACH | TSCA | MSL Rating / Peak Reflow | Package |
---|---|---|---|---|---|---|---|
XR17D154CV-F | N | Y | Y | Y | Y | L3 / 260ᵒC | LQFP144 |
XR17D154IV-F | N | Y | Y | Y | Y | L3 / 260ᵒC | LQFP144 |
Click on the links above to download the Certificate of Non-Use of Hazardous Substances.
Parts & Purchasing
Part Number | Pkg Code | Min Temp | Max Temp | Status | Suggested Replacement | PDN |
---|---|---|---|---|---|---|
XR17D154CV | LQFP144 | 0 | 70 | OBS | XR17D154CV-F | |
XR17D154CV-F | LQFP144 | 0 | 70 | OBS | XR17V354IB176-F | |
XR17D154CVTR-F | LQFP144 | 0 | 70 | OBS | XR17D154CV-F | |
XR17D154IV | LQFP144 | -40 | 85 | OBS | XR17D154IV-F | |
XR17D154IV-F | LQFP144 | -40 | 85 | OBS | XR17V354IB176-F | |
XR17D154IVTR-F | LQFP144 | -40 | 85 | OBS | XR17D154IV-F |
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Packaging
Pkg Code | Details | Quantities | Dimensions |
---|---|---|---|
LQFP144 |
|
|
|
Notifications
FAQs & Support
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Submit a Technical Support Question As a New Question
For some UARTs, Microsoft certified drivers are available for Windows Operating System and can be downloaded via Windows Update. These drivers and others, including for Linux and other Operating Systems can be found by visiting https://www.exar.com/design-tools/software-drivers Please note Software Driver Use Terms.
Click on the version link under Driver Version of the desired type of UART, part number and operating system. A zip file is downloaded which contains a ReadMe file with instructions.
Links to datasheets and product family pages are in the software driver table for easy reference.The XR17Cxxx, XR17Dxxx, and XR17Vxxx are all UARTs but have the following basic differences:
- PCI UARTs
- XR17Cxxx – 5V supply, up to 33MHz clock input
- XR17Dxxx – 5V or 3.3V supply, up to 33MHz clock input
- XR17V2xx – 3.3V supply, up to 66MHz clock input
- PCIe UARTs
- XR17V3xx – 3.3V supply, up to 125MHz clock input
https://www.exar.com/quality-assurance-and-reliability/lead-free-program
The Parts & Purchasing section of the product page shows the Status of all orderable part numbers for that product. Click Show obsolete parts, to see all EOL or OBS products.
1. Native drivers: Native drivers may be found in all major OS such as Windows, Linux, and Max OSX. Typically these drivers will be automatically loaded. In some cases, these are basic drivers and may have limitations on advanced device functionality, however. USB HID, Hub and CDC-ACM drivers are examples of native drivers. The CDC-ACM driver be used with our CDC-ACM class USB UARTs, but has limited functionality.
2. MaxLinear custom drivers: MaxLinear custom drivers may be used to support additional functionality in MaxLinear devices. For example, the MaxLinear custom driver for USB UARTs overcomes the limitations of the native CDC-ACM driver. See https://www.exar.com/design-tools/software-drivers for a list of and access to the drivers that we currently have. In some cases, the MaxLinear driver can also be customized, or source code can be provided after executing a Software License Agreement.
Please check that all the following conditions are satisfied first.
- no interrupts pending (ISR bit-0 = 1)
- modem inputs are not toggling (MSR bits 0-3 = 0)
- RX input pin is idling HIGH • divisor (the value in DLL register) is non-zero
- TX and RX FIFOs are empty
Be sure sleep mode bit has been set to 1. If there are multiple UART channels, the sleep conditions must be true for all channels.
See more on Sleep Mode in AN204 UART Sleep Mode.
Yes. Note: some devices do have powersave mode. If UART goes into powersave mode, then the registers are not accessible.
See more on Sleep Mode in AN204 UART Sleep Mode.
Read LSR register to check whether the UART receives the data or not.
- If LSR value is 0x60, it means that either UART receiver FIFO doesn’t receive the data or the data in receiver FIFO has been read out before the read of LSR.
- If LSR value is 0x00, it means data is still in the THR (clock doesn’t oscillate to transmit data).
- If LSR value is 0xFF, it means either UART is in powersave mode or UART is powered off. For those devices with powersave mode, be sure that UARTS are not in powersave mode.
See more on Sleep Mode in AN204 UART Sleep Mode.
- Check whether the register set can be accessed.
- Check whether the crystal is oscillating fully.
- Check whether the data can be transmitted in internal loopback mode.
See more on Sleep Mode in AN204 UART Sleep Mode.