LTC128 (PEF38000)

Line Testing Controller for Third-Party xDSL Transceivers
Active
Order Now

Overview

Information
# of Testable DLS Ports 128
Application xDSL Linetesting & Wetting
# of Connected Multiplexers 8
Min Temp (°C) -40
Max Temp (°C) 85
Package LQFP-100
X-Y Dimension (mm) 16 x 16
Show more

The MELT family provides metallic line testing capabilities for all-digital loops (ADL) in next generation networks (xDSL / G.fast). The MELT family consists of the LTC combined with the MLT016 or MLT116. This chipset replaces traditional test heads or enables line testing on xDSL / G.fast linecards where metallic line testing over POTS is no longer available. MLT016/MLT116 acts as mixed signal test head, while LTC128/LTC129 is controller and signal processor of MELT chipset

  • Low-cost integrated 16-channel solution for metallic line testing in all-digital-loop systems
  • Allows installation of MELT capable DSL linecards even if POTS is still in place
  • Designed for ADSL and VDSL MELT measurements
  • Provision of DC wetting current
  • Integrated high voltage switch matrix to serve 16 lines
  • No impact of testing or wetting on ADSL and VDSL transmission.
  • In the case of SHDSL systems, please select the MLT016
  • High voltage line feed and accurate current sense
  • Fast testing time (below 30 seconds/channel), allowing on-line loop diagnostics during service calls
  • ITU-T K.20 (enhanced test levels) compatible without requiring additional protection elements
  • Total voltage range up to 150 V (±75 V)
  • Low Bill of Material (BoM)
  • Enables high density system solutions
  • Reliable Smart Power Technology (SPT170) for high voltage part
  • Standard CMOS technology (0.13 µm) for mixed signal part

  • xDSL / G.fast access networks

Documentation & Design Tools

Type Title Version Date File Size
Register for a myMxL account or Login to myMxL to view all Technical Documentation & Design Tools.

Parts & Purchasing

Part Number Product ID (MMID) Packaging Type Status
PEF38000HLV11 946928 Tray Active

Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.