The XRP2997 is a Double Data Rate (DDR) termination voltage regulator supporting all power requirements of DDR I, II and III memories and is capable of sinking or sourcing 2A continuously.
Tightly regulating its output voltage within ±20mV, the XRP2997 converts input voltages as low as 1.1V while the output voltage is adjustable through an external resistor divider or by forcing the VREF pin voltage. It maintains a fast line and load transient response and only requires an output capacitance of 22µF to operate. An enable function via an external MOSFET and a soft-start feature allow for a controlled implementation of power-up sequencing.
Built-in source/sink overcurrent, over temperature and undervoltage lockout protections insure safe operation under abnormal operating conditions.
- DDR1, DDR2 and DDR3 support
- 0.75VTT generation
- ±20mV output voltage offset
- 2 Amps continuous current sourcing and sinking
- 1.1V to 5.5V wide input voltage range
- Adjustable output voltage
- Suspend to RAM(STR), enable and soft-start functions
- Stable with 22µF ceramic capacitor
- UVLO, over temperature and overcurrent protections
- Minimal external components
- Pin/function compatible with Exar SP2996B
- RoHS compliant "Green"/Halogen Free 8-pin SOIC (EP) package
- DDR I/II/III memory termination
- Active termination buses
- Audio/video equipment
- Video graphics cards
Parts & Purchasing
|Part Number||Pkg Code||RoHS||Min Temp||Max Temp||Status||Buy Now||Order Samples|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Frequently Asked Questions
In this example, we looked for XRA1201. Click on part number header or on the link at the bottom of the result. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted with the blue arrow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link. A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers, the legend still present:
Another method to find out if a part is OBS or EOL is to click on SUPPORT at the top:
And then Product Change Notifications:
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.