|Information||100mA Low Dropout Voltage Regulator (LDOs)|
|VOUT (V)||3.3, 5|
|VOUT Adj MIN (V)|
|VOUT Adj MAX (V)|
|VIN MIN (V)||2.4|
|VIN MAX (V)||30|
|Features||Enable, Power Good, Current limit, thermal protection|
|Junction Temp Range (°C)||-40 to 125|
|Accuracy (%)||0.5%, 1%|
|Output Noise (µVRMS)||100|
The LP2950 and LP2951 are low power voltage regulators. These devices are an excellent choice for use in battery powered application such as cordless telephones, radio control systems and portable computers. The LP2950 and LP2951 feature low quiescent current and low dropout voltage (typical 50mV at light load and 380mV at 100mA). This includes a tight initial tolerance (0.5% typical), extremely good load and line regulation (0.05% typical) and very low output temperature coefficient (20 ppm/ºC typical), making the LP2950/LP2951 useful as a low power voltage reference.
The error flag output feature is used as a power-on reset for warning of a low output voltage, due to a falling input voltage. The logic-compatible shutdown feature enables the regulator to be switched on and off. The LP2950 is offered in a 3-pin TO-92 package compatible with other 5V, 3.3V regulators. The LP2951 is available in an 8-lead SOIC package.
- 5.0V and 3.3V versions at 100mA output
- Very low quiescent current
- Low dropout voltage: 380mV at 100mA
- Extremely tight load and line regulation
- Very low temperature coefficient
- Current and thermal limiting
- Need only 1 uF for stability
- Error flag warns of output dropout
- Logic controlled electronic shutdown
- 5.0V part allows adjustable output from 1.25V to 29V
Documentation & Design Tools
|Data Sheets||LP2950/LP2951 Data Sheet||H||December 2021||3.6 MB|
|Application Notes||ANP-02, Thermal Considerations for Linear Regulators||A||November 2006||351 KB|
|Application Notes||ANP-03, Thermal Calculator||A||February 2001||27 KB|
|Product Brochures||Power Management Brochure||October 2020||2.4 MB|
Quality & RoHS
|Part Number||RoHS | Exempt||RoHS||Halogen Free||REACH||TSCA||MSL Rating / Peak Reflow||Package|
|LP2951CS-L-5-0/TR||N||Y||Y||Y||Y||L1 / 260ᵒC||NSOIC8|
|LP2951CS-L-3-3/TR||N||Y||Y||Y||Y||L1 / 260ᵒC||NSOIC8|
Click on the links above to download the Certificate of Non-Use of Hazardous Substances.
Parts & Purchasing
|Part Number||Pkg Code||Status||Suggested Replacement||Buy Now||Order Samples||PDN|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
FAQs & Support
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Submit a Technical Support Question As a New Question
In this example, we looked for XRA1201. Click on part number header or on the link at the bottom of the result. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted with the blue arrow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link. A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers, the legend still present:
Another method to find out if a part is OBS or EOL is to click on SUPPORT at the top:
And then Product Change Notifications:
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.