The SP6200 and SP6201 are CMOS Low Dropout (LDO) regulators designed to meet a broad range of applications that require accuracy, speed and ease of use.
These LDOs offer extremely low quiescent current, which only increases slightly under load, thus providing advantages in ground current performance over bipolar LDOs. The LDOs handle an extremely wide load range and guarantee stability with a 1μF ceramic output capacitor. They have excellent low frequency Power Supply Rejection Ratio (PSRR), not found in other CMOS LDOs and thus offer exceptional line regulation. High frequency PSRR is better than 40dB up to 400kHz. Load regulation is excellent and temperature stability is comparable to bipolar LDOs. An enable feature is provided on all versions.
Both LDOs are available in fixed and adjustable output voltage versions and come in an industry standard 5-pin SOT-23 and small 2 x 3mm 8-pin DFN packages. A VOUT good indicator is provided on all fixed output versions.
- Low dropout voltage: 160mV @ 100mA
- High output voltage accuracy: 2%
- Ultra-low shutdown current: 1µA Max
- Ultra-low GND current:
- 200µA @ 200mA load
- 28µA @ 100µA load
- Extremely tight load and line regulation
- Current and thermal limiting
- RESET output (VOUT good)
- Logic-controlled electronic enable
- Unconditionally stable with 1μF ceramic
- Adjustable output available
- Tiny DFN package (2mm x 3mm) or SOT23-5
- Available in lead-free packaging, to order add "-L" to part number
- Available in green/halogen-free packaging, to order add "-G" to part number
Parts & Purchasing
|Part Number||Pkg Code||RoHS||Min Temp||Max Temp||Status||Buy Now||Order Samples|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
|07/30/2013||Addition of an alternate qualified assembly supplier, Carsem (Malaysia) for SOT23 package using copper wire bonding. Material Change.||PCN_13-0521-03a-1033.pdf|
|03/04/2009||Notice of Obsolescence Discontinued by Exar Corporation due to low market demand||PDN_090304-01-1033.pdf|
|12/05/2007||Announcing the re-activation of previously announced discontinued products. The previously announced discontinued products listed above are being re-activated due to continuing Customer demand.||PCN_07-1204-01-1033.pdf|
|11/28/2007||Announcing the re-activation of previously announced discontinued products. The previously announced discontinued products listed above are being re-activated due to continuing Customer demand.||PCN_07-1128-01-1033.pdf|
|02/28/2007||Product Obsolescence Letter and Discontinuation Notification. Discontinued.||POL_022807-1033.pdf|
Frequently Asked Questions
In this example, we looked for XRA1201. When you hover over it, it will turn grey and you can click anywhere in the grey box. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted in yellow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link:
A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers:
Another method to find out if a part is OBS or EOL is to click on SUPPORT:
And then Product Change Notifications
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.