|Information||200mA RF Ultralow Dropout Regulator (LDO)|
|VOUT Adj MIN (V)||-|
|VOUT Adj MAX (V)||-|
|VIN MIN (V)||2|
|VIN MAX (V)||6|
|Junction Temp Range (°C)||-40 to 85|
|Output Noise (µVRMS)||30|
The SP6260 family is a series of CMOS positive low noise voltage regulators capable of delivering up to 200mA of continuous current. Each of these devices consists of a voltage reference, an error amplifier, a resistor network for setting the output voltage, a current limit circuit for current protection and a chip enabled circuit.
The SP6260 series feature high ripple rejection, low dropout voltage, low noise, high output voltage accuracy and low current consumption which make them ideal for use in various battery powered and handheld devices.
The SP6260 series is offered in the following fixed output voltage options: 1.2V, 1.5V, 1.8V, 2.5V, 2.8V, 3.0V, 3.2V and 3.3V.
The SP6260 family is available in a standard lead free, RoHS compliant 5-pin SOT-23 package.
- 200mA continuous output current
- 150mV dropout voltage @ IOUT=100mA (except 1.2V and 1.5V version)
- 1.2V to 3.3V fixed output voltages
- ±2% output voltage accuracy
- 2V minimum input voltage
- 30µVrms output noise (10Hz-100KHz)
- 70dB power supply rejection ratio
- 4mV line regulation (typ)
- 12mV load regulation (typ)
- Low standby current: 0.1µA yypical
- Low quiescent current: 25µA typical
- Lead-free, RoHS compliant 5-pin, SOT-23 package
- Handheld equipment
- Wireless communication devices
- Battery powered equipment
- Industrial and medical equipment
Documentation & Design Tools
|Data Sheets||SP6260 200mA RF Low Noise LDO Regulator||2.1.1||February 2020||919.9 KB|
|Application Notes||AN200, Downloading and Installing CAD Symbols and Footprints with Ultra Librarian||April 2019||1.2 MB|
|Product Brochures||Power Management Brochure||October 2020||2.4 MB|
|Symbols & Footprints||SP6260GEK-L/TR CAD File (.bxl)||September 2018||81.7 KB|
Quality & RoHS
Parts & Purchasing
|Part Number||Pkg Code||Min Temp||Max Temp||Status||Suggested Replacement||Buy Now||Order Samples||PDN|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
FAQs & Support
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Submit a Technical Support Question As a New Question
In this example, we looked for XRA1201. Click on part number header or on the link at the bottom of the result. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted with the blue arrow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link. A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers, the legend still present:
Another method to find out if a part is OBS or EOL is to click on SUPPORT at the top:
And then Product Change Notifications:
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.