|Information||3A High Current, Low Dropout Voltage Regulator|
|VOUT Adj MIN (V)||1.25|
|VOUT Adj MAX (V)||16|
|VIN MIN (V)||2.8|
|VIN MAX (V)||16|
|Output Noise (µVRMS)||260|
|Junction Temp Range (°C)||-40 to 125|
|Features||Enable,Current limit and thermal protection,Reverse battery protection|
The XRP29302 is a 3A, highly accurate voltage regulator with a low dropout voltage of 600mV (typical) at 3A.
This regulator is specifically designed for low voltage applications that require a low dropout voltage and a fast transient response. It is fully fault protected against overcurrent, reverse battery and positive and negative voltage transients. On-Chip trimming adjusts the reference voltage to 1% initial accuracy.
The XRP29302 is offered in 5-pin TO-220 and TO-263 packages.
- Adjustable output down to 1.25V
- 1% output accuracy
- Output current of 3A
- Low dropout voltage of 450mV @ 3A
- Extremely tight load and line regulation
- Extremely fast transient response
- Reverse battery protection
- Zero current shutdown
Documentation & Design Tools
|Data Sheets||3A Low Dropout Voltage Regulator Data Sheet||2.2.3||May 2022||1.7 MB|
|Application Notes||AN200, Downloading and Installing CAD Symbols and Footprints with Ultra Librarian||April 2019||1.2 MB|
|Product Brochures||Power Management Brochure||October 2020||2.4 MB|
|Symbols & Footprints||SPX29302T5-L/TR CAD File (.bxl)||September 2018||19.1 KB|
Quality & RoHS
Parts & Purchasing
|Part Number||Pkg Code||Min Temp||Max Temp||Status||Suggested Replacement||Buy Now||Order Samples||PDN|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
FAQs & Support
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Submit a Technical Support Question As a New Question
The Parts & Purchasing section of the product page shows the Status of all orderable part numbers for that product. Click Show obsolete parts, to see all EOL or OBS products.