|Information||2A 5V-Adjustable Low Dropout Voltage Regulator|
|VOUT (V)||5, Adj|
|VOUT Adj MIN (V)||0.7|
|VOUT Adj MAX (V)||5.3|
|VIN MIN (V)||1.8|
|VIN MAX (V)||6|
|Features||Enable,Power Good,Current limit and thermal protection,Reverse Bias Protection|
|Junction Temp Range (°C)||-40 to 85|
|Output Option||Adjustable, Fixed|
|Output Noise (µVRMS)||24|
The XRP6272 is a low dropout voltage regulator capable of a constant output current up to 2 Amps. A wide 1.8V to 6V input voltage range allows for single supply operations from industry standard 1.8V, 2.8V, 3.3V and 5V power rails as well as the 5.8V rail.
With better than ±2% output voltage accuracy, low output noise and high Power Supply Rejection Ratio (PSRR), the XRP6272 is perfectly suited for powering RF circuits. Optimized for use with small, low cost ESR ceramic output capacitors and featuring a low 30μA quiescent current, this device is also adequate for use in battery powered portable equipment. The XRP6272 operates by default as a 5V fixed output voltage regulator while usage of an external resistor voltage divider allows adjustable output voltages as low as 0.7V. An enable function, power good flag and output noise reduction pin complete the feature set.
Built-in current limit and thermal protections ensure safe operation under abnormal operating conditions.
The XRP6272 is offered in RoHS compliant, green/halogen free 5-pin TO-252 and 8-pin exposed pad SOIC packages.
- Guaranteed 2A output current
- Low 550mV dropout at 3.3V/2A
- 1.8V to 6V single input voltage range
- Fixed 5V and adjustable output voltage
- ±2% output voltage accuracy
- 30µA quiescent current
- Power good and enable functions
- 70dB power supply rejection ratio
- Low output noise
- 0.01µA shutdown current
- Current limit and thermal protection
- "Green"/Halogen free 5-pin TO252 and 8-pin exposed pad SOIC packages
- Networking equipment
- RF circuitry power supplies
- Set-top box equipment
- Portable equipment
Documentation & Design Tools
|Data Sheets||XRP6272 2A 5V-Adjustable Low Dropout Voltage Regulator||1.2.2||September 2021||1.3 MB|
|Application Notes||AN200, Downloading and Installing CAD Symbols and Footprints with Ultra Librarian||April 2019||1.2 MB|
|Product Flyers||Power Management & Interface Products for Cable, Satellite and IP STB/Home Gateway||March 2018||2 MB|
|Product Brochures||Power Management Brochure||October 2020||2.4 MB|
|Symbols & Footprints||XRP6272ITC5TR-F CAD File (.bxl)||September 2018||19.5 KB|
Quality & RoHS
|Part Number||RoHS | Exempt||RoHS||Halogen Free||REACH||TSCA||MSL Rating / Peak Reflow||Package|
|XRP6272ITC5TR-F||N||Y||Y||Y||Y||L2 / 260ᵒC||TO-252-5 OPT2|
|XRP6272IDBTR-F||N||Y||Y||Y||Y||L3 / 260ᵒC||HSOIC8 OPT1|
Click on the links above to download the Certificate of Non-Use of Hazardous Substances.
Parts & Purchasing
|Part Number||Pkg Code||Min Temp||Max Temp||Status||Buy Now||Order Samples|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
FAQs & Support
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Submit a Technical Support Question As a New Question
In this example, we looked for XRA1201. Click on part number header or on the link at the bottom of the result. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted with the blue arrow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link. A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers, the legend still present:
Another method to find out if a part is OBS or EOL is to click on SUPPORT at the top:
And then Product Change Notifications:
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.