Description
The MxL7213 dual step-down power module integrates the control, drivers, bootstrap diodes, inductors and MOSFETs in a single package for point-of-load supplies. Operating from an input voltage range of 4.5V to 18V, the MxL7213 supports two outputs each with an output voltage range of 0.6V to 5.3V, set by a single external resistor. Just a few input and output capacitors are required. It supplies either two 13A outputs, a single 26A or up to 100A when paralleled with additional MxL7213 modules. Attention to thermal design, component selection and internal construction results in higher efficiency and extended operating range than devices with the same industry standard pinout.
Supply rail sequencing is supported as well as frequency synchronization, multiphase operation and output voltage tracking. Device temperature monitoring is accomplished with an onboard temperature diode. The peak current mode architecture provides very fast transient responses to line and load changes and doesn’t sacrifice stability.
A host of protection features, including over-current, over-temperature, short-circuit and UVLO, help achieve safe operation under abnormal operating conditions. Available in space saving and thermally enhanced 15mm x 15mm packaging, the 4.41mm height LGA package and the 5.01mm height BGA package have RoHS compliant terminal finish.
Supply rail sequencing is supported as well as frequency synchronization, multiphase operation and output voltage tracking. Device temperature monitoring is accomplished with an onboard temperature diode. The peak current mode architecture provides very fast transient responses to line and load changes and doesn’t sacrifice stability.
A host of protection features, including over-current, over-temperature, short-circuit and UVLO, help achieve safe operation under abnormal operating conditions. Available in space saving and thermally enhanced 15mm x 15mm packaging, the 4.41mm height LGA package and the 5.01mm height BGA package have RoHS compliant terminal finish.
Features
- Dual 13A or single 26A output
- Offers power system ease of design
- 4.5V to 18V wide single input voltage
- 0.6V to 5.3V adjustable output voltage
- Multiphase current sharing with multiple MxL7213s for up to 100A output
- Frequency synchronization
- Higher efficiency and wider Vin range than competitive devices with same compatible industry standard pinout
- Remote differential sense amplifier
- Peak current mode architecture for fast transient response
- Adjustable switching frequency (250kHz to 780kHz)
- Overcurrent protection
- Output overvoltage protection
- Internal temperature monitor and thermal shutdown protection
- Thermally enhanced 15mm x 15mm x 4.41mm LGA package and 15mm x 15mm x 5.01mm BGA package
Application
- Telecom and Networking Equipment
- Industrial Equipment
- Test Equipment
Design Tools
Packaging
| Pkg Code | Details | Quantities | Dimensions | |
|---|---|---|---|---|
| BGA144 15x15 |
|
|
|
|
| LGA144 15x15 OPT2 |
|
|
|
|
Parts & Purchasing
| Part Number | Pkg Code | RoHS | Min Temp | Max Temp | Status | Buy Now | Order Samples |
|---|---|---|---|---|---|---|---|
| MxL7213-ABA-T | BGA144 15x15 | PRE | |||||
| MxL7213-AYA-T | LGA144 15x15 OPT2 | PRE | |||||
| MxL7213-EVK-000-A | Kit | PRE | |||||
| MxL7213-EVK-001-A | Kit | PRE | |||||
| MxL7213-EVK-002-A | Kit | PRE |
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Quality Documents
Additional Quality Documentation may be available, please contact customersupport@maxlinear.com.