Overview
| Information | |
|---|---|
| Package | BGA |
| IQ (µA) | 4900 |
| VIN MIN (V) | 4.5 |
| VIN MAX (V) | 15 |
| # of Outputs | 2 |
| IOUT/Ch (A) | 18 |
| VOUT MIN (V) | 0.6 |
| VOUT MAX (V) | 1.8 |
| Frequency (kHz) | 400-780 |
| Efficiency (%) | 95 |
| X-Y Dimension (mm) | 16x16 |
| Z Dimension (mm) | 5.01 |
| Features | UVLO, OTP, Soft Start/Tracking, Frequency Synchronization, PGOOD, Over Current Protection, Output Overvoltage Protection, PFM, Adjustable Frequency |
| Junction Temp Range (°C) | -40 to 125 |
| Switching Frequency (kHz) |
The MxL7218 is a dual channel, 18A step-down power module. It includes a wide 4.5V to 15V input voltage range and supports two outputs each with an output voltage range of 0.6V to 1.8V, set by a single external resistor. The MxL7218 requires just a few input and output capacitors, which simplifies design and shortens time-to-market. The module supplies either two 18A outputs, a single 36A output or up to 216A when paralleled with additional MxL7218 modules. A unique package design where inductors are mounted externally and careful component selection result in higher efficiency and extended operating range relative to devices with the same industry standard pinout. The complete switch mode DC/DC power supply integrates the control, drivers, bootstrap diodes, bootstrap capacitors, inductors, MOSFETs and HF bypass capacitors in a single package for point-of-load conversions.
The MxL7218 includes a temperature diode that enables device temperature monitoring. It also has an adjustable switching frequency and utilizes a peak current mode architecture which allows fast line and load transient response.
A host of protection features, including overcurrent, overtemperature, output overvoltage and UVLO, help this module achieve safe operation under abnormal operating conditions.
The MxL7218 is available in a space saving 16mm x 16mm x 5.01mm RoHS compliant BGA package.
- Dual 18A or single 36A output
- Input voltage range: 4.5V to 15V
- Output voltage range: 0.6V to 1.8V
- Multiphase current sharing with multiple MxL7218s for up to 216A output
- Frequency synchronization
- Differential remote sense amplifier
- Peak current mode architecture for fast transient response
- Adjustable switching frequency (400kHz to 780kHz)
- Overcurrent protection
- Output overvoltage protection
- Internal temperature monitor and thermal shutdown protection
- Thermally enhanced 16mm x 16mm x 5.01mm BGA package
- Telecom and Networking Equipment
- Industrial Equipment
- Test Equipment
Documentation & Design Tools
All Types
Data Sheets
Application Notes
Product Briefs & Brochures
Design Tools & Simulation
User Guides & Manuals
| Type | Title | Version | Date | File Size |
|---|---|---|---|---|
| Data Sheets | MxL7218 Dual 18A or Single 36A Power Module | R02 | June 2021 | 2.2 MB |
| Application Notes | LGA / BGA Module Assembly Application Note | Rev D | May 2019 | 1023.6 KB |
| User Guides & Manuals | Quad MxL7218 EVK User's Manual | R00 | December 2020 | 7 MB |
| User Guides & Manuals | MxL7218 EVK User's Manual | R02 | October 2020 | 6.2 MB |
| Product Flyers | Current Mode, Dual Channel Power Modules Flyer | R00 | November 2020 | 2.7 MB |
| Product Brochures | Power Management Brochure | October 2020 | 2.4 MB | |
| SIMPLIS Models | MxL7218 SIMPLIS Model | R00 | October 2020 | 129.4 KB |
Quality & RoHS
| Part Number | RoHS | Exempt | RoHS | Halogen Free | REACH | TSCA | MSL Rating / Peak Reflow | Package |
|---|---|---|---|---|---|---|---|
| MxL7218-ABA-T | Y | 7c, 15 | N | Y | Y | Y | BGA144 16x16 | Y |
| MxL7218-EVK-1 | N/A | N/A | N/A | N/A | N/A | Kit | N/A |
| MxL7218-EVK-2 | N/A | N/A | N/A | N/A | N/A | Kit | N/A |
Click on the links above to download the Certificate of Non-Use of Hazardous Substances.
Additional Quality Documentation may be available, please Contact Support.
Parts & Purchasing
| Part Number | Pkg Code | Min Temp | Max Temp | Status |
|---|---|---|---|---|
| MXL7218-ABA-T | BGA144 16x16 | -40 | 125 | Active |
| MXL7218-EVK-1 | Board | Active | ||
| MXL7218-EVK-2 | Board | Active |
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Packaging
FAQs & Support
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Submit a Technical Support Question As a New Question
Visit the product page for the part you are interested in. The part's status is listed in the Parts & Purchasing section. You can also view Product Lifecycle and Obsolescence Information including PDNs (Product Discontinuation Notifications).
To visit a product page, type the part into the search window on the top of the MaxLinear website.
In this example, we searched for XRA1201. Visit the product page by clicking the part number or visit the orderable parts list by clicking "Orderable Parts".
The Parts & Purchasing section of the product page shows the Status of all orderable part numbers for that product. Click Show obsolete parts, to see all EOL or OBS products.
Find the product page of the part that you want to get an evaluation board for and click on Parts & Purchasing. Example:
Find the icons under Buy Now or Order Samples:
Click on the Buy Now icon and see who has stock and click on the Buy button:
Alternatively, you can click on the Order Samples
If the icons are missing, then contact Customer Support.