The SP7651 is a high voltage synchronous step-down switching regulator optimized for high efficiency. The part is designed to be especially attractive for dual supply, 12V step-down with 5V used to power the controller. This lower VCC voltage minimizes power dissipation in the part. The SP7651 is designed to provide a fully integrated buck regulator solution using a fixed 900kHz frequency, PWM voltage mode architecture. Protection features include UVLO, thermal shutdown and output short-circuit protection. The SP7651 is available in the space saving 7mm X 4mm DFN package.
- 2.5V to 20V step-down achieved using dual input
- Output voltage down to 0.8V
- 3A output capability (up to 5A with air flow)
- Built in low RDSON power FETs (40 mΩ typ)
- Highly integrated design, minimal components
- 900 kHz fixed frequency operation
- UVLO detects both VCC and VIN
- Over temperature protection
- Short circuit protection with auto restart
- Wide BW Amp allows type II or III compensation
- Programmable soft-start
- Fast transient response
- High efficiency: greater than 92% possible
- Nonsynchronous start up into a pre-charged output
- Small 7mm x 4mm DFN package
Parts & Purchasing
|Part Number||Pkg Code||RoHS||Min Temp||Max Temp||Status||Buy Now||Order Samples|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
|05/01/2017||Embedded FETs updated to latest production version.||PCN 16-0207-01 FETs-1033.pdf|
|01/05/2017||Addition of an alternate qualified location, ANST, China.||PCN 16-0835-01 ANST-1033.pdf|
|07/26/2016||Product discontinuation notification. Discontinued.||PDN 16-0626-01-1033.pdf|
|10/16/2013||Qualified PPF (NiPdAu) lead termination finish in assembly to replace matte-tin plating. Material change.||PCN_13-0936-01-1033.pdf|
|10/04/2013||Addition of an alternate qualified assembly site, UTAC Thailand, for assembly using copper or gold wire bonding. Material change and alternate assembly site.||PCN_13-0522-04-1033.pdf|
|02/28/2007||Product Obsolescence Letter and Discontinuation Notification. Discontinued.||POL_022807-1033.pdf|
Frequently Asked Questions
In this example, we looked for XRA1201. When you hover over it, it will turn grey and you can click anywhere in the grey box. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted in yellow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link:
A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers:
Another method to find out if a part is OBS or EOL is to click on SUPPORT:
And then Product Change Notifications
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.