|Information||1.5A Synchronous Step-Down Converter|
|Special Features||Light Load PFM, Enable, Over Current Protection, Synchronous Rectification, Thermal Shutdown, Soft Start Built-in, Internal Compensation, 100% Duty Cycle|
|VIN MIN (V)||2.5|
|VIN MAX (V)||5.5|
|# of Outputs||1|
|VOUT MIN (V)||0.6|
|VOUT MAX (V)||5|
|X x Y Package Dimension (mm)||-|
|Control Mode||Current Mode PWM|
|Operating Temperature (°C)||-40 to 125|
The XRP6657 is a high efficiency synchronous step-down DC to DC converter capable of delivering up to 1.5 Amp of current and optimized for portable battery operated applications.
Operating over an input voltage range of 2.5V to 5.5V, it provides an adjustable regulated output voltage down to 0.6V. The XRP6657 uses a constant 1.3 MHz frequency Pulse Width Modulation (PWM) scheme allowing for compact external components, low output voltage ripple and fixed frequency noise, while Pulse Skip Mode (PSM) is used to improve light load efficiency. A low dropout mode provides 100% duty cycle operation. The solution footprint is further reduced by a current mode internal compensation network and built-in synchronous switch removing the need for an external Schottky. Overcurrent and over temperature protection insures safe operations under abnormal operating conditions.
The XRP6657 is available in a compact RoHS compliant "green"/halogen free thin 6-pin DFN package.
- Guaranteed 1.5A output current
- Fixed 1.3MHz frequency PWM operations
- Up to 95% efficiency
- Input voltage: 2.5V to 5.5V
- Adjustable output voltage
- Internal compensation network
- No Schottky diode required
- LDO operation: 100% duty cycle
- 240µA quiescent current (no load)
- 1µA shutdown current
- Soft-start function
- Overcurrent/over temperature protection
- "Green"/halogen free DFN-6 package
Documentation & Design Tools
|Data Sheets||XRP6657 1.5A 1.3MHz Synchronous Step Down Converter||1.5.1||February 2020||1.1 MB|
|Application Notes||AN200, Downloading and Installing CAD Symbols and Footprints with Ultra Librarian||April 2019||1.2 MB|
|User Guides & Manuals||XRP6657 Evaluation Board Manual||1.1.0||February 2012||528.5 KB|
|Product Flyers||Power Management & Interface Products for Cable, Satellite and IP STB/Home Gateway||March 2018||2 MB|
|Product Brochures||Power Management Brochure||October 2020||2.4 MB|
|Symbols & Footprints||XRP6657IHBTR-F CAD File (.bxl)||September 2018||23.9 KB|
Quality & RoHS
Parts & Purchasing
|Part Number||Pkg Code||Min Temp||Max Temp||Status||Suggested Replacement||Buy Now||PDN|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
FAQs & Support
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Submit a Technical Support Question As a New Question
Find the product page of the part that you want to get an evaluation board for and click on Parts & Purchasing. Example:
Find the icons under Buy Now or Order Samples:
Click on the Buy Now icon and see who has stock and click on the Buy button:
Alternatively, you can click on the Order Samples
If the icons are missing, then contact Customer Support.
The Parts & Purchasing section of the product page shows the Status of all orderable part numbers for that product. Click Show obsolete parts, to see all EOL or OBS products.