XRP7659

1.5A Non Synchronous Step-Down Regulator
Data Sheet

Description

The XRP7659 is a current-mode PWM step-down (buck) voltage regulator capable of delivering an output current up to 1.5Amps. A wide 4.5V to 18V input voltage range allows for single supply operation from industry standard 5V, 9.6V and 12V power rails.

With a 1.4MHz constant operating frequency, integrated high-side MOSFET and loop compensation, the XRP7659 reduces the overall component count and solution footprint. Current-mode control provides fast transient response and cycle-by-cycle current limit. An integrated soft-start prevents inrush current at turn-on, and in shutdown mode the supply current drops to 0.1µA.

Built-in output overvoltage (open load), over temperature, cycle-by-cycle over-current and undervoltage lockout (UVLO) protection insure safe operation under abnormal operating conditions.

The XRP7659 is a pin and function compatible device to Monolithic Power Systems MP2359 for input voltages below 18V.

The XRP7659 is offered in a RoHS compliant, "green"/halogen free 6-pin SOT23 package.

Features

  • 1.5A continuous output current
  • 4.5V to 18V wide input voltage
  • PWM current-mode control
    • 1.4MHz constant operation
    • Up to 92% efficiency
  • Adjustable output voltage
    • 0.81V to 15V range
    • ±3% accuracy
  • Enable function and soft-start
  • Built-in thermal, overcurrent, UVLO and output overvoltage protection
  • Pin/function (VIN<18V) compatible to MP2359
  • RoHS compliant, "green"/halogen free 6-pin SOT23 package

Application

  • Distributed power architectures
  • Point of Load (POL) converters
  • Audio video equipment
  • Medical and industrial equipment

Design Tools

Symbols & Footprints

Packaging

Parts & Purchasing

Part Number Pkg Code Min Temp Max Temp Status Buy Now Order Samples
XRP7659ISTR-F -40 85 Active Order
XRP7659EVB Board Active
Show obsolete parts
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.

Quality & Environmental Data

Part Number RoHS | Exempt RoHS Halogen Free REACH MSL Rating / Peak Reflow Package
XRP7659ISTR-F N Y Y Y L3 / 260ᵒC SOT-23-6

Click on the links above to download the Certificate of Non-Use of Hazardous Substances.

Additional Quality Documentation may be available, please Contact Support.
Distribution Date Description File
02/19/2016 Material change. Qualified copper wire bonding assembly.
01/09/2015 Alternate Assembly Site Change. Qualified JCET ChuZhou for assembly of the listed parts.
07/29/2013 Qualified ABLECOAT 8008 (wafer back-side coated) die attach material in assembly to replace ABLEBOND 8290 (dispense type) die attach material. Material Change

Support

Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.

Frequently Asked Questions

The best way to determine this is to go to maxlinear.com and type the part into the search function. At or near the top of the results you should see something that looks like:
 
 
 

In this example, we looked for XRA1201. Click on part number header or on the link at the bottom of the result.  This brings you to the product page. For example:

 
 
 

Click on Parts & Purchasing, highlighted with the blue arrow above. The screen changes to:

 
 
 

Notice the status column and the “Show obsolete parts” link.  A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers, the legend still present:

 
 
 

Another method to find out if a part is OBS or EOL is to click on SUPPORT at the top:

 
 
 

And then Product Change Notifications:

 
  
 

Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:

 
 
 

If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.

Find the product page of the part that you want to get an evaluation board for and click on Parts & Purchasing. Example:

 

Find the icons under Buy Now or Order Samples:

 
 

Click on the Buy Now icon and see who has stock and click on the Buy button:

 
 
 

Alternatively, you can click on the Order Samples

 
 

If the icons are missing, then contact Customer Support.

The -F suffix indicates ROHS / Green compliance:
https://www.exar.com/quality-assurance-and-reliability/lead-free-program

Submit a Technical Support Question As a New Question