|Information||12A 300kHz Step-Down Regulator|
|# of Outputs||1|
|VIN MIN (V)||3|
|VIN MAX (V)||22|
|VOUT MIN (V)||0.8|
|VOUT MAX (V)||20.2|
|X x Y Package Dimension (mm)||7x4|
|Control Mode||Voltage Mode PWM|
|Special Features||Enable, Power Sequencing, Synchronous Rectification, Thermal Shutdown, UVLO Adjustable, Built-in 5V LDO, Soft Start Adjustable, Adjustable Current Limit|
|Operating Temperature (°C)||-40 to 125|
The XRP7662 is a synchronous voltage mode PWM step-down (buck) regulator capable of a constant output current up to 12Amps. A wide 5V to 22V single input voltage range allows for single supply operations from industry standard 5V, 12V and 18V power rails. Operations down to 3V are supported with an additional biasing voltage.
With a 300kHz constant operating frequency and integrated high and low side switch, the XRP7662 reduces the overall component count and solution footprint. In addition to a 1% output set-point accuracy, this device provides high efficiency, low ripple and excellent line and load regulation. An enable function and soft-start feature allow for controlled power up sequencing implementation.
Built-in current limiting, UVLO, output short-circuit and over temperature protection insure safe operation under abnormal operating conditions.
The XRP7662 is offered in a RoHS compliant, lead free 26-pin 7mm x 4mm DFN package.
- 12A continuous current
- 5V-22V single input voltage rail
- 3V-22V input voltage with 5V bias
- PWM voltage mode control
- 300kHz fixed synchronous operations
- Low RDSON power switches
- 0.8V minimum output voltage – 1% accuracy
- Type II and III compensations support
- Programmable soft-start
- Over Temperature and short-circuit protection/auto restart
- Current limiting
- RoHS compliant lead free 26-pin DFN
- US patent #6,922,041
- Distributed power architectures
- Point of Load (POL) converters
- Power supply modules
- FPGAs, DSPs and processor supplies
Documentation & Design Tools
|Data Sheets||XRP7662 PowerBlox 12A 300kHz Step-Down Regulator||2.2.1||February 2020||1.6 MB|
|Product Brochures||Power Management Brochure||October 2020||2.4 MB|
Quality & RoHS
Parts & Purchasing
|Part Number||Pkg Code||Min Temp||Max Temp||Status||Suggested Replacement||PDN|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
FAQs & Support
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Submit a Technical Support Question As a New Question
The Parts & Purchasing section of the product page shows the Status of all orderable part numbers for that product. Click Show obsolete parts, to see all EOL or OBS products.
Find the product page of the part that you want to get an evaluation board for and click on Parts & Purchasing. Example:
Find the icons under Buy Now or Order Samples:
Click on the Buy Now icon and see who has stock and click on the Buy button:
Alternatively, you can click on the Order Samples
If the icons are missing, then contact Customer Support.