The XRP7664 is a synchronous current mode PWM step-down (buck) regulator capable of a constant output current up to 2Amps. A wide 4.5V to 18V input voltage range allows for single supply operations from industry standard 5V and 12V power rails.
With a 340kHz constant operating frequency and integrated high and low side 100mΩ/100mΩ MOSFETs, the XRP7664 reduces the overall component count and solution footprint. Current-mode control provides fast transient response and cycle-by-cycle current limit. An adjustable soft-start prevents inrush current at turn-on, and in shutdown mode the supply current drops to 0.1uA.
Built-in output overvoltage (open load), over temperature, cycle-by-cycle over current and undervoltage lockout (UVLO) protections insure safe operations under abnormal operating conditions.
The XRP7664 is offered in a RoHS compliant, “green”/halogen free 8-pin SOIC package.
- Pin/function compatible to MP1482
- 2A continuous output current
- 4.5V to 18V wide input voltage
- PWM current mode control
- 340kHz constant operations
- Up to 95% efficiency
- Adjustable output voltage
- 0.925V to 16V range
- 2% accuracy
- Programmable soft-start and enable function
- Built-in thermal, overcurrent, UVLO and output overvoltage protections
- RoHS compliant, “green”/halogen free 8-pin SOIC package
Symbols and Footprints
- Distributed power architectures
- Point of Load (POL) converters
- Audio video equipment
- Medical and industrial equipment
Parts & Purchasing
|Part Number||Pkg Code||RoHS||Min Temp||Max Temp||Status||Buy Now||Order Samples|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
|02/15/2017||Qualification of alternate assembly subcon, ANST.||PCN 16-1149-02 ANST-1033.pdf|
|06/17/2013||Addition of an alternate qualified wafer foundry. Process change.||PCN_13-0519-01-1033.pdf|
|04/17/2013||Design & Datasheet Changes. Product Improvement and compatibility with industry equivalent devices.||PCN_13-0402-01-1033.pdf|
Frequently Asked Questions
In this example, we looked for XRA1201. When you hover over it, it will turn grey and you can click anywhere in the grey box. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted in yellow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link:
A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers:
Another method to find out if a part is OBS or EOL is to click on SUPPORT:
And then Product Change Notifications
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.
Find the product page of the part that you want to get an evaluation board for and click on Parts & Purchasing. Example:
Find the icons under Buy Now or Order Samples:
Click on the Buy Now icon and see who has stock and click on the Buy button:
Alternatively, you can click on the Order Samples
If the icons are missing, then contact Customer Support.