|Information||Low Power Microprocessor Supervisory Circuits|
|Temperature Range (°C)||0 to 70,-40 to 85|
|# of Channels||1|
|VCC MIN (V)||1|
|VCC MAX (V)||5.5|
|Reset Threshold (V)||2.93|
|Output Driver Type||Push-pull|
|Reset Accuracy (mV)||125|
|Special Features||Watchdog Timer, Manual Reset, Power Fail-Low Battery Indicator|
|Watchdog Timeout (s)||1.6|
|Reset Time Delay (ms)||200|
|IQ (µA) typ||25|
The SP706R/S/T and SP708R/S/T series is a family of microprocessor (µP) supervisory circuits that integrate the myriad components required by discrete solutions which monitor power-supplies and batteries in µP and digital systems.
The SP706R/S/T and SP708R/S/T series significantly improve system reliability and operational efficiency when compared to solutions using discrete components. The features of the SP706R/S/T and SP708R/S/T series include a watchdog timer, a µP reset, a power fail comparator and a manual-reset input.
The SP706R/S/T and SP708R/S/T series is ideal for 3.0V or 3.3V applications in automotive systems, computers, controllers, and intelligent instruments. The SP706R/S/T and SP708R/S/T series is an ideal solution for systems in which critical monitoring of the power supply to the µP and related digital components is required.
- Precision low voltage monitor
- 200ms reset pulse width
- SP706R/S/T: active low
- SP708R/S/T: active high and active low
- Independent watchdog timer
- 1.6s timeout (SP706R/S/T)
- Enable/disable function
- 40µA maximum supply current
- Debounced TTL/CMOS manual reset input
- Reset asserted down to VCC=1V
- VCC glitch immunity
- Voltage monitor for power failure or low battery warning
- 8-Pin NSOIC and MSOP packages
- Pin compatible with industry standards 706R/S/T and 708R/S/T
Documentation & Design Tools
|Data Sheets||SP706R/S/T - SP708R/S/T 3.0V/3.3V Low Power Microprocessor Supervisory Circuits||3.0.2||October 2019||978.1 KB|
|Application Notes||AN200, Downloading and Installing CAD Symbols and Footprints with Ultra Librarian||April 2019||1.2 MB|
|Product Flyers||Power Management & Interface Products for Cable, Satellite and IP STB/Home Gateway||March 2018||2 MB|
|Product Brochures||Power Management Brochure||October 2020||2.4 MB|
|Symbols & Footprints||SP706SCU-L/TR CAD File (.bxl)||September 2018||80.2 KB|
|Symbols & Footprints||SP706SEN-L/TR CAD File (.bxl)||September 2018||75.5 KB|
Quality & RoHS
|Part Number||RoHS | Exempt||RoHS||Halogen Free||REACH||TSCA||MSL Rating / Peak Reflow||Package|
|SP706SEN-L/TR||N||Y||Y||Y||Y||L1 / 260ᵒC||NSOIC8|
|SP706SCU-L/TR||N||Y||Y||Y||Y||L1 / 260ᵒC||MSOP8|
Click on the links above to download the Certificate of Non-Use of Hazardous Substances.
Parts & Purchasing
|Part Number||Pkg Code||Min Temp||Max Temp||Status||Suggested Replacement||Buy Now||Order Samples||PDN|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
FAQs & Support
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Submit a Technical Support Question As a New Question
In this example, we looked for XRA1201. Click on part number header or on the link at the bottom of the result. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted with the blue arrow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link. A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers, the legend still present:
Another method to find out if a part is OBS or EOL is to click on SUPPORT at the top:
And then Product Change Notifications:
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.