Overview
| Information | 3.0V to +5.5V USB Power Control Switch |
|---|---|
| # of Channels | 1 |
| IQ (µA) | 75 |
| VIN MIN (V) | 3 |
| VIN MAX (V) | 5.5 |
| Max Current/Ch (mA) | 500 |
| Current Limit (mA) | 850 |
| Enable | Yes |
| Enable Logic | Active low, Active high |
| Special Features | Channel fault flag indicator, Under voltage lockout (UVLO), Short circuit protection, Thermal shutdown protection |
| Temperature Range (°C) | -40 to 85 |
| Package | NSOIC-8 |
The SP2525A device is an integrated high-side power switch ideal for self-powered and buspowered Universal Serial Bus (USB) applications.
The high-side switches are MOSFETs with 70mΩ RDS(ON), which meets USB voltage drop requirements for maximum transmission wire
length. Multi-purpose open-drain fault flag output indicates over-current limiting, thermal shutdown, or undervoltage lockout for each channel. Output current is typically limited to 0.85A below the 5A safety requirement, and the thermal shutdown function shuts the switch off to prevent damage under overcurrent conditions. Guaranteed minimum output rise time limits inrush current during hot plug-in, minimizing EMI and preventing the voltage at the upstream port from dropping excessively.
- 3.0V to 5.5V input voltage range
- 500mA continuous load current per channel
- 2.6V undervoltage lockout
- 1.25A short-circuit current limit
- 100mΩ maximum on-resistance
- 75µA on-state supply current
- 1µA shutdown current
- Output can be forced higher than input
- (off-state)
- Thermal shutdown
- Slow turn on and fast turn off
- Active-high version: SP2525A-1
- Active-low version: SP2525A-2
Documentation & Design Tools
| Type | Title | Version | Date | File Size |
|---|---|---|---|---|
| Data Sheets | SP2525A Single Channel USB Power Distribution Switch | 2.1.1 | February 2020 | 850.9 KB |
| Application Notes | AN200, Downloading and Installing CAD Symbols and Footprints with Ultra Librarian | April 2019 | 1.2 MB | |
| Product Flyers | Power Management & Interface Products for Cable, Satellite and IP STB/Home Gateway | March 2018 | 2 MB | |
| Product Brochures | Power Management Brochure | October 2020 | 2.4 MB | |
| Product FAQs | SP2525a-1 FAQ | 1.0.0 | August 2006 | 191 KB |
| Symbols & Footprints | SP2525A-1EN-L/TR CAD File (.bxl) | September 2018 | 76 KB | |
| Symbols & Footprints | SP2525A-2EN-L/TR CAD File (.bxl) | September 2018 | 75.5 KB |
Quality & RoHS
| Part Number | RoHS | Exempt | RoHS | Halogen Free | REACH | TSCA | MSL Rating / Peak Reflow | Package |
|---|---|---|---|---|---|---|---|
| SP2525A-1EN-L/TR | N | Y | Y | Y | Y | L3 / 260ᵒC | NSOIC8 OPT2 |
| SP2525A-2EN-L/TR | N | Y | Y | Y | Y | L3 / 260ᵒC | NSOIC8 OPT2 |
Click on the links above to download the Certificate of Non-Use of Hazardous Substances.
Additional Quality Documentation may be available, please Contact Support.
Parts & Purchasing
| Part Number | Pkg Code | Min Temp | Max Temp | Status | Suggested Replacement | Buy Now | Order Samples | PDN |
|---|---|---|---|---|---|---|---|---|
| SP2525A-1EN | NSOIC8 OPT2 | -40 | 85 | OBS | ||||
| SP2525A-1EN-L | NSOIC8 OPT2 | -40 | 85 | OBS | ||||
| SP2525A-1EN-L/TR | NSOIC8 OPT2 | -40 | 85 | Active | Order | |||
| SP2525A-1EN/TR | NSOIC8 OPT2 | -40 | 85 | OBS | ||||
| SP2525A-2EN-L/TR | NSOIC8 OPT2 | -40 | 85 | Active | Order |
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Packaging
Notifications
FAQs & Support
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Submit a Technical Support Question As a New Question
Visit the product page for the part you are interested in. The part's status is listed in the Parts & Purchasing section. You can also view Product Lifecycle and Obsolescence Information including PDNs (Product Discontinuation Notifications).
To visit a product page, type the part into the search window on the top of the MaxLinear website.
In this example, we searched for XRA1201. Visit the product page by clicking the part number or visit the orderable parts list by clicking "Orderable Parts".
The Parts & Purchasing section of the product page shows the Status of all orderable part numbers for that product. Click Show obsolete parts, to see all EOL or OBS products.
