The XRP2526 is a dual-channel integrated high-side power distribution switch with independent enables and fault flags. A wide 1.75V to 5.5V input voltage range allows for operations from industry standard 1.8V, 3.3V and 5V power rails.
Optimized for USB VBUS power distribution, the XRP2526 is compliant with the USB 3.0 specification and can be used in any self powered USB applications. The power-switch rise and fall times are controlled to minimize current surges during turn on/off.
Built-in overcurrent, undervoltage lockout (UVLO), reverse current and over temperature protections insure safe operations under abnormal operating conditions.
The XRP2525 is pin and function compatible to Exar's SP2526A.
- Single-channel current switch
- 900mA capable
- 1.15A overcurrent limit
- 1.75V to 5.5V input voltage range
- USB 2.0/3.0 compliant
- Active high or low individual enable
- Individual channel fault flag indicator
- Undervoltage lockout, reverse current and thermal shutdown protection
- Pin/function compatible and upgrade to SP2526A
- Green/halogen free 8-pin NSOIC package
Symbols and Footprints
- Self powered USB 2.0 and 3.0 hubs
- USB compliant VBUS power distribution
- Audio video equipment
- Generic power switching
Parts & Purchasing
|Part Number||Pkg Code||RoHS||Min Temp||Max Temp||Status||Buy Now||Order Samples|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
|07/11/2017||Product Discontinuation Notification||PDN_17-0623-01-1033.pdf|
|03/17/2017||Qualification of copper wire bonding assembly in Carsem.||PCN 17-0310-01 Carsem Cu-1033.pdf|
|02/23/2017||Qualification of alternate assembly subcon, ANST, China.||PCN 16-1149-02-01 ANST-1033.pdf|
|02/15/2017||Qualification of alternate assembly subcon, ANST.||PCN 16-1149-02 ANST-1033.pdf|
|07/26/2016||Product discontinuation notification. Discontinued.||PDN 16-0626-01-1033.pdf|
|04/28/2016||Qualification of alternate assembly subcon, JCET.||PCN 16-0207-03 JCET-1033.pdf|
|01/31/2012||Material Change: Bond wire changed from 2.0 mils gold to 1.5 mils copper. To prevent a cost increase of product to customers due to the rising prices of gold.||PCN_12-0126-01-1033.pdf|
Frequently Asked Questions
In this example, we looked for XRA1201. When you hover over it, it will turn grey and you can click anywhere in the grey box. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted in yellow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link:
A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers:
Another method to find out if a part is OBS or EOL is to click on SUPPORT:
And then Product Change Notifications
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.