- Trimmed bandgap to 0.5% and 1.0%
- Wide operating current 1mA to 100mA
- Extended temperature. range: 0°C to 105°C
- Low temperature coefficient 30 ppm/°C
- Offered in 3-pin SOT-23 (M)
- Replacement for TL431, AS2431
- Low noise output
- Battery operating equipment
- Adjustable supplies
- Switching power supplies
- Error amplifiers
- Single supply amplifier
- Monitors / VCRs / TVs
- Personal computers
Parts & Purchasing
|Part Number||Pkg Code||RoHS||Min Temp||Max Temp||Status||Buy Now||Order Samples|
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
|02/16/2018||Standard tape and reel quantity will change from 2500 pieces to 3000 pieces for SOT23-3L/5L/6L. Addendum: Remove SOT-89 parts from affected products list.||PCN16-1146-02A Addendum-1033.pdf|
|01/26/2017||Qualification of alternate assembly subcon, JCET.||PCN 15-0939-02 JCET-1033.pdf|
|01/12/2017||Standard tape and reel quantity will change from 2500 pieces to 3000 pieces for SOT23-3L/5L/6L.||PCN 16-1146-02 Reel size change-1033.pdf|
|07/26/2016||Product discontinuation notification. Discontinued.||PDN 16-0626-01-1033.pdf|
|07/30/2013||Addition of an alternate qualified assembly supplier, Carsem (Malaysia) for SOT23 package using copper wire bonding. Material Change.||PCN_13-0521-03a-1033.pdf|
|12/14/2009||Material Change. Use environmental friendly Green (halogen free) material and also for standardization.||PCN_09-1109-01-1033.pdf|
|02/28/2007||Product Obsolescence Letter and Discontinuation Notification. Discontinued.||POL_022807-1033.pdf|
|02/02/2006||Announcing transfer of certain Power Management and Interface Products from Hillview fabrication and facility to wafer foundary Silan. See attached Product List Power Management and Interface products as listed are being transfer to external wafer foundry, due to cessation of operations of the sipex Hillview Fabrication manufacturing site||PCN-06-0130-42-1033.pdf|
|01/17/2006||Announcing discontinuance of certain low volume Power Management and Interface Products and last dates to place lifetime. buy orders Low Volume Power Management and Interface products are being discontinued due to cessation of operations of the Sipex Hillview Fabrication manufacturing site.||PCN-06-0117-01-1033.pdf|
|12/22/2004||Sipex has qualified CET to perform assembly operation fot the SOT23 -3 L package. Some of the CET SOT23 3 L pkg. dimensions are slightly different than the Jedec To-236 Variation AB std. Improve manufacturability||PCN-04-1222-01-1033.pdf|
Frequently Asked Questions
In this example, we looked for XRA1201. When you hover over it, it will turn grey and you can click anywhere in the grey box. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted in yellow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link:
A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers:
Another method to find out if a part is OBS or EOL is to click on SUPPORT:
And then Product Change Notifications
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.