The MxL7704 is a five output Universal PMIC optimized for powering low power FPGAs, DSPs, and microprocessors from 5V inputs. Four synchronous step down buck regulators range from 1.5A system power to 4A core power. A 100mA LDO provides a clean 1.5V to 3.6V power for auxiliary devices. All outputs support ±10% margining and the two highest power outputs support dynamic voltage control to support processors that can utilize this function to save power. Through a 400kHz I2C interface, the customer can monitor an input voltage flag and PGOOD flags for each output. The I2C port can also be used to modify power up and down sequencing options, assign PGOOD outputs to the PGOOD pins, enable outputs and select switching frequency.
High switching frequency and a current mode architecture with internal compensation enable a very fast transient response to line and load changes without sacrificing stability and keeping board space to a minimum.
Fault protection features include input undervoltage lockout, overcurrent protection, and thermal protection.The MxL7704 is offered in a 5mm x 5mm QFN package.
- Input voltage range: 4.0V to 5.5V
- 4 Synchronous Buck Regulators
- Internally compensated current mode
- 1MHz to 2.1MHz switching frequency
- Buck 1: 3.0V to 3.6V, 20mV step, 1.5A
- Buck 2: 1.3V to 1.92V, 20mV step, 1.5A
- Buck 3: 0.8V to 1.6V, 6.25mV step, 2.5A
- Buck 4: 0.6V to 1.4V, 6.25mV step, 4A
- 100mA LDO: 1.5V to 3.6V, 20mV step
- ±2% maximum total dc output error over line, load and temperature
- 3.3V/5V 400kHz I2C interface
- Dynamic voltage scaling
- Status monitoring by channel
- Sequencing control
- Input voltage status register
- Highly flexible conditional sequencing engine with external input
- 2 configurable PGOOD outputs
- Adjustable switching frequency
- 5mm x 5mm 32-pin QFN package
- Supported by Excel Configuration Tool
- MxL7704-X: Xilinx® Zynq® Ultrascale+™ ZU2 / ZU3 Reference Design
- Low power processor, ASIC and FPGA power
- Industrial control
- Test equipment
- POS terminals
Parts & Purchasing
|Part Number||Pkg Code||Min Temp||Max Temp||Status||Buy Now||Order Samples|
|MxL7704-AQB-R||QFN32 5x5 OPT4||-40||125||ACTIVE||Order|
|MxL7704-AQB-T||QFN32 5x5 OPT4||-40||125||EOL||
|MxL7704-XQB-R||QFN32 5x5 OPT4||-40||125||ACTIVE||Order|
|MxL7704-XQB-T||QFN32 5x5 OPT4||-40||125||EOL||
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.
Quality & Environmental Data
|Part Number||RoHS | Exempt||RoHS||Halogen Free||REACH||MSL Rating / Peak Reflow||Package|
|MxL7704-AQB-R||N||Y||Y||Y||L2 / 260ᵒC||QFN32 5x5 OPT4|
|MxL7704-XQB-R||N||Y||Y||Y||L2 / 260ᵒC||QFN32 5x5 OPT4|
Click on the links above to download the Certificate of Non-Use of Hazardous Substances.
Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.
Frequently Asked Questions
In this example, we looked for XRA1201. Click on part number header or on the link at the bottom of the result. This brings you to the product page. For example:
Click on Parts & Purchasing, highlighted with the blue arrow above. The screen changes to:
Notice the status column and the “Show obsolete parts” link. A legend tells you the definition of the different statuses. Click on the “Show obsolete parts” link to see EOL or OBS part numbers along with the Active part numbers, the legend still present:
Another method to find out if a part is OBS or EOL is to click on SUPPORT at the top:
And then Product Change Notifications:
Type the part into the search, and click on one of the part numbers from the drop down menu. Then you can look for the Product Discontinuation Notice, which generally is at the top of the list, for example:
If you see this, it tells you that this particular orderable part has been discontinued and when the last order date is, or was. If you click on the file, then you can view the notice we sent about this if you purchased the part in the recent past. It may also advise of a replacement part. When an orderable part first becomes discontinued, Product Discontinuation Notices are sent are sent to those who have purchased the parts in the recent past, if purchased directly, with a dated opportunity to place a last order.
Find the product page of the part that you want to get an evaluation board for and click on Parts & Purchasing. Example:
Find the icons under Buy Now or Order Samples:
Click on the Buy Now icon and see who has stock and click on the Buy button:
Alternatively, you can click on the Order Samples
If the icons are missing, then contact Customer Support.
Submit a Technical Support Question As a New Question