XR77103-MoCA

3-Output PMIC for MaxLinear MoCA Solutions

Overview

Information 3-Output PMIC for MaxLinear MoCA Solutions
Package TQFN-32
IQ (µA) 2600
Special Features -
VIN MIN (V) 4.5
VIN MAX (V) 14
# of Outputs 3
VOUT MIN (V) 0.9V, 1.8V, 3.3V
VOUT MAX (V) 0.9V, 1.8V, 3.3V
Frequency (kHz) 560
Efficiency (%) 90
Junction Temp Range (°C) -40 to 125
IQ (mA) 1.5
Accuracy (%) <1.0
IOUT (A) 2
Controller/ Regulator Regulator
Gate Drive Pull Up/Down 3A / 2A / 2A
Internal MOSFETs Yes
Programmable Frequency Range (MHz) 0.560
NVM Technology Pre-programmed
PowerArchitect Version# N/A
Additional Features Light Load PFM, Enable, Over Current Protection, Power Good, Power Sequencing, Synchronous Rectification, Thermal Shutdown, UVLO, Phase Interleaving, Clock Sync, Soft Start Built-in
X x Y Package Dimension (mm) 4x4
Control Mode Current Mode PWM
Operating Temperature (°C) -40 to 125
Set Point Resolution (mV)
Control Technology Current Mode PWM/PSM
Show more

The XR77103-MoCA PMIC is designed to power MaxLinear’s G.hn chipsets, the MoCA 2.0 MxL370x and MoCA 2.5 MxL371x along with a single port Ethernet PHY such as the GPY241. It features 3 high efficiency synchronous buck regulators with integrated power switches and sequencing engine to provide the 0.9V, 1.8V, and 3.3V rails of the MoCA SoC. The 0.9V core rail is capable of supplying the 3A peaks demanded by the SoC(1) and is compatible with the SoC DVS control.
 
The XR77103-MoCA can operate from 5V, 9V, and 12V powered systems with minimal required external components, and packaged in a 4x4mm QGN that provides the smallest size solution possible. With a nominal switching frequency of 560kHz, the regulators can also be synchronized to an external clock in applications where EMI control is critical. An internal supervisor circuit monitors each converter output and asserts PGOOD once sequencing is done, outputs are reported in regulation, and the reset timer expires.

XR77103-MoCA features a supervisor circuit that monitors each converter output. The PGOOD pin is asserted once sequencing is done, outputs are reported in regulation, and the reset timer expires. The polarity of the signal is active high.
 
1Worst case supply condition at 0.9V power rails around 1ms.

  • 4.5V to 14V wide input supply voltage range
  • Built-In MOSFET and synchronous rectifier
  • 1% accurate outputs
  • Current-mode control with simple compensation circuit
  • External synchronization
  • Power good
  • Protection
    • Thermal shutdown
    • Overvoltage transient protection
    • Overcurrent protection
  • 32pin TQFN package, 4mm x 4mm

  • MaxLinear MoCA 2.0 MxL370x power
  • MaxLinear MoCA 2.5 MxL371x power

Documentation & Design Tools

Type Title Version Date File Size
Data Sheets XR77103-MoCA 3-Output PMIC for MaxLinear MoCA Solutions R00 July 2021 785.4 KB
User Guides & Manuals XR77103-MoCA EVB User Manual 1 February 2022 3.9 MB
Register for a myMxL account or Login to myMxL to view all Technical Documentation & Design Tools.

Parts & Purchasing

Part Number Pkg Code Min Temp Max Temp Status Buy Now Order Samples
XR77103ELBTR-MOCA TQFN32 4x4 -40 125 Active Order
XR77103-MOCA-EVK-1 Board Active

Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.

Packaging

Pkg Code Details Quantities Dimensions PDF
TQFN32 4x4
  • JEDEC Reference:
  • MSL Pb-Free: L2 @ 260ᵒC
  • MSL SnPb Eutectic:
  • ThetaJA:
  • Bulk Pack Style: Tray
  • Quantity per Bulk Pack: 490
  • Quantity per Reel: 3000
  • Quantity per Tube:
  • Quantity per Tray: 490
  • Reel Size (Dia. x Width x Pitch): 330 x 12 x 8
  • Tape & Reel Unit Orientation: Quadrant 1
  • Dimensions: mm
  • Length: 4
  • Width: 4
  • Thickness: 0.8
  • Lead Pitch: 0.4