Reliable RS-485 /
RS-422 Connectivity for Demanding Industrial Designs

The MxL8323x family combines data rates from 500kbps to 50Mbps with flexible 1.65V to 5.5V logic interfacing and robust system-level protection. Designed for industrial communication in electrically noisy environments, these half-duplex transceivers support up to 256 nodes and operate from -40°C to +125°C.

Engineer probing a circuit board

High-Performance Serial Connectivity with Flexible System Interfacing

The MxL8323x family gives designers a simpler path to robust RS-485 / RS-422 connectivity by integrating low-voltage logic interfacing directly into the transceiver. Support for 1.65V to 5.5V logic allows direct connection to ASICs, CPUs, FPGAs, and MCUs, eliminating an external level translator and reducing BOM count, routing, and board area.

The family supports data rates from 500kbps to 50Mbps, up to 256 nodes, propagation delay below 20 ns, and differential skew below 3.5 ns. An extended ±15V common-mode range, advanced receiver fail-safe, and integrated ESD and EFT protection help maintain reliable communication in electrically noisy industrial systems.

Available in compact 8-pin and 10-pin packages, the MxL8323x family is well suited for designs where signal integrity, timing margin, protection, and interface flexibility all matter.

Features and Benefits
  • Eliminate external level translators with a 1.65V to 5.5V logic interface that connects directly to low-voltage ASICs, CPUs, FPGAs, and MCUs.
  • Support high-speed industrial communications with data rates up to 50Mbps.
  • Connect more devices on a single bus with a 1/8 unit-load receiver supporting up to 256 nodes.
  • Maintain reliable communication in noisy environments with an extended ±15V operational common-mode range.
  • Improve system robustness with ±15kV HBM ESD, ±8kV IEC contact ESD, and ±4kV EFT protection.
  • Prevent undefined receiver states with advanced fail-safe protection for open, shorted, and idle bus conditions.
  • Protect against abnormal operating conditions with driver short-circuit and thermal shutdown protection.
  • Operate across demanding industrial environments with a -40°C to +125°C temperature range.
  • Reduce EMI when lower data rates are sufficient with selectable slew-rate control on MxL83235 and MxL83236.
  • Support safer insertion and lower-power operation with hot-swap protection and shutdown mode on MxL83235 and MxL83236.
MxL8323x chip

Integrated Level Translation Simplifies Low-Voltage System Design

The MxL8323x family integrates the level translation needed to connect low-voltage ASICs, CPUs, and FPGAs directly to an RS-485 interface. This eliminates the need for a separate external level translator, reducing component count and simplifying board design. The family supports logic interfaces down to 1.8V, data rates up to 50Mbps, low propagation delay of less than 20 ns, and differential skew below 3.5 ns, while maintaining robust ESD, EFT, and common-mode performance.

Traditional design with a separate level translator compared to the integrated MxL8323x design
Product Specifications
XLSExport▶
MxL83232 New 0.5 NSOIC-8, MSOP-8 - - - Buy Now Order Samples MxL83232 datasheet 500kbps High-Performance RS-485 / 422 Transceivers with 1.65V-5.5V I/O Interface and Extended IEC ESD and EFT Protection RS-485, RS-422 3.3, 5 1 1 Half 4 15 8 Advanced 256 - ✔ -40 to 125 - - ✔ - - -
MxL83233 New 20 NSOIC-8, MSOP-8 - - MxL83233E-ADA-EVK-1 Buy Now Order Samples MxL83233 datasheet 20Mbps High-Performance RS-485 / 422 Transceivers with 1.65V-5.5V I/O Interface and Extended IEC ESD and EFT Protection RS-485, RS-422 3.3, 5 1 1 Half 4 15 8 Advanced 256 - ✔ -40 to 125 - - ✔ - - -
MxL83234 New 50 NSOIC-8, MSOP-8 - - - Buy Now Order Samples MxL83234 datasheet 50Mbps High-Performance RS-485 / 422 Transceivers with 1.65V-5.5V I/O Interface and Extended IEC ESD and EFT Protection RS-485, RS-422 3.3, 5 1 1 Half 4 15 8 Advanced 256 - ✔ -40 to 125 - - ✔ - - -
MxL83235 New 20 MSOP-10, DFN-10 - - - Buy Now Order Samples MxL83235 datasheet 20Mbps High-Performance RS-485 / 422 Transceivers with 1.65V-5.5V I/O Interface and Extended IEC ESD and EFT Protection RS-485, RS-422 3.3, 5 1 1 Half 4 15 8 Advanced 256 - ✔ -40 to 125 - - ✔ - - -
MxL83236 New 50 MSOP-10, DFN-10 - - MxL83236-AHA-EVK-1 Buy Now Order Samples MxL83236 datasheet 50Mbps High-Performance RS-485 / 422 Transceivers with 1.65V-5.5V I/O Interface and Extended IEC ESD and EFT Protection RS-485, RS-422 3.3, 5 1 1 Half 4 15 8 Advanced 256 - ✔ -40 to 125 - - ✔ - - -
Evaluation Kits
XLSExport▶
MxL83233E-ADA-EVK-1 20Mbps MxL83233 Evaluation Kit, NSOIC-8 Buy Now MxL83233 EVK User Manual
MxL83236-AHA-EVK-1 50Mbps MxL83236 Evaluation Kit, DFN-10 Buy Now MxL83236 EVK User Manual
Applications
Industrial Sensors

Low-power, long-distance communication for distributed sensing and field devices.

EV Charging

Low-EMI, noise-tolerant communication for charging infrastructure.

Building Automation

Reliable serial communication for HVAC, elevators, security, and fire systems over long cable runs.

Industrial Automation/Motor Control

Robust RS-485 / RS-422 connectivity with high transient immunity and PROFIBUS support.

Frequently Asked Questions

Yes, if the transceiver provides a compatible logic supply. MxL8323x devices support a 1.65V to 5.5V logic interface, allowing direct connection to low-voltage processors, FPGAs, ASICs, and MCUs without a separate level translator.

A separate logic supply allows the digital interface voltage to be independent of the RS-485 bus supply. In the MxL8323x family, the logic interface operates from 1.65V to 5.5V while the transceiver operates from a 3.0V to 5.5V supply, helping eliminate external level translation.

The number of supported nodes depends on the receiver unit load. MxL8323x devices use a 1/8 unit-load receiver, allowing up to 256 transceivers on a properly designed RS-485 multidrop network.

Fail-safe circuitry keeps the receiver output in a known state when the RS-485 bus is open, shorted, or idle. MxL8323x devices use advanced fail-safe protection to help prevent undefined receiver states and false data.

RS-485 and RS-422 interfaces are often connected to long cables and exposed connectors in industrial environments, making them susceptible to electrostatic discharge and electrical fast transients. The MxL8323x family provides ±15kV HBM ESD, ±15kV IEC air-discharge ESD, ±8kV IEC contact ESD, and ±4kV EFT protection.

Common-mode range determines how much ground-potential difference can exist between RS-485 nodes while maintaining correct receiver operation. The MxL8323x family supports an extended ±15V operational common-mode range for industrial systems with ground offsets and electrical noise.

Yes, RS-485 is commonly used as the physical layer for PROFIBUS networks. When operated from a 5V supply, MxL8323x devices provide a differential driver output greater than 2.1V for PROFIBUS-compatible designs.

Reducing signal edge rates can help lower EMI and minimize reflections in lower-speed RS-485 networks. MxL83235 and MxL83236 include a selectable 500kbps slew-rate-limited mode in addition to their higher-speed operating modes.

For applications where lower EMI is more important than maximum data rate, MxL83232 supports operation up to 500kbps. MxL83235 and MxL83236 also provide selectable 500kbps slew-rate-limited operation while retaining higher-speed capability when needed.

Hot-swap protection helps prevent unintended bus activity when a board is powered up or inserted into an active RS-485 network. MxL83235 and MxL83236 include hot-swap protection on the driver-enable and receiver-enable control inputs.

Key considerations include data rate, cable length, number of bus nodes, logic voltage, common-mode range, ESD and EFT protection, temperature range, package, fail-safe behavior, and whether features such as slew-rate control or hot-swap protection are required.