XRP7713

3x Channel Programmable Power Management
Order Now

Overview

Information 3x Channel Programmable Power Management
# of Outputs 3
VIN MIN (V) 4.75
VIN MAX (V) 25
VOUT MIN (V) 0.9
VOUT MAX (V) 0.9*Vin
Set Point Resolution (mV) 50
Controller/ Regulator Controller
Gate Drive Pull Up/Down 6ohm / 3ohm
Internal MOSFETs No
IQ (mA) 9
Programmable Frequency Range (MHz) 0.3 to 1.5
Control Technology 0.3 to 1.5
NVM Technology OTP
Junction Temp Range (°C) -40 to 125
Package TQFN32
Special Features I2C with PEC
PowerArchitect Version# 4
Additional Features
Show more

The XRP7713 is a three output Pulse-Width Modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs. The device provides a complete power management solution in one IC and is fully programmable via an I2C serial interface. Independent Digital Pulse Width Modulator (DPWM) channels regulate output voltages and provide all required protection functions such as current limiting and overvoltage protection.

Each output voltage can be programmed from 0.9V to 5.1V without the need of an external voltage divider. The wide range of the programmable DPWM switching frequency (from 300 KHz to 1.5 MHz) enables the user to optimize between efficiency and component size. Input voltage range is from 4.75V to 25V. An I2C bus interface is provided to program the IC as well as to communicate with the host for fault reporting and handling, power rail parameters monitoring, etc.

The device offers a complete solution including independently programmable: soft-start, soft-stop, start-up delay and ramp of each PWM regulator.

The Exar Configuration Model XR77xxEVB-XCM-V80 interface board provides designers with a simple, quick and inexpensive means of evaluating and prototyping new designs using Programmable Universal PMIC devices with PowerArchitect4. This Evaluation Board is designed only for low volume engineering purposes; not production volumes. For production requirements commercial programmers must be used. The Evaluation Board is provided “as is and whereas” and without any warranty as to results, merchantability or purpose. Exar is not responsible for misuse of the Evaluation Board.

  • 3 channel step-down controller
    • Programmable output voltage 0.9V to 5.1V
    • Programmable 1.5MHz DPWM frequency
    • Integrated FET drivers
  • 4.75V to 5.5V and 5.5V to 25V input voltage range
  • Up to 5 reconfigurable GPIO pins
  • Fully programmable via I2C interface
  • Independent Digital Pulse Width Modulator (DPWM) channels
  • Complete monitoring and reporting
  • Complete power up/down sequencing
  • Full on board protection OTP, UVLO, OCP and OVP
  • Built-in 3.3V/5V LDO
  • Evaluation Board, Demo Kit and Configuration Module (XCM) are available for evaluation and development purposes only
  • PowerArchitect™ Design and Configuration Software
  • Third-Party Programming Support
  • Green/Halogen free 32-pin TQFN

  • Multi channel power supplies
  • Audio-video equipment
  • Industrial and telecom equipment
  • Processor and DSP based equipment

Documentation & Design Tools

Type Title Version Date File Size
Data Sheets XRP7713 Three Channel Digital PWM Step Down Controller 1.1.2 November 2018 1.2 MB
Application Notes AN200, Downloading and Installing CAD Symbols and Footprints with Ultra Librarian April 2019 1.2 MB
Application Notes ANP-37, PowerXR EMI Reduction Technique Utilizing Spread-Spectrum Clock Dithering 1.0.1 July 2013 3 MB
Application Notes ANP-32, Practical Layout Guidelines for PowerXR Designs 1.1.0 October 2012 1.5 MB
Application Notes ANP-35, XRP77XX: Extending the MOSFET Gate Drive Conductors 1.0.0 May 2011 2 MB
Application Notes ANP-31, PowerXR Configuration and Programming 1.0.0 August 2010 405.5 KB
User Guides & Manuals XR77XXEVB-XCM-V80 (Configuration Module) 1.0.1 October 2017 876.2 KB
User Guides & Manuals Quick Start Guide: XRP7713EVB-DEMO-1-KIT 1.0.0 April 2011 570 KB
User Guides & Manuals XRP7713 Evaluation Board Manual 1.0.0 April 2011 1.5 MB
Product Flyers Universal PMICs April 2019 2 MB
Product Brochures Power Management Brochure October 2020 2.4 MB
Symbols & Footprints XRP7713ILB-F CAD File (.bxl) September 2018 164.7 KB
Symbols & Footprints XRP7713ILBTR-F CAD File (.bxl) September 2018 164.7 KB
PowerArchitect PowerArchitect
Register for a myMxL account or Login to myMxL to view all Technical Documentation & Design Tools.

Quality & RoHS

Part Number RoHS | Exempt RoHS Halogen Free REACH TSCA MSL Rating / Peak Reflow Package
XRP7713ILBTR-F N Y Y Y Y L2 / 260ᵒC TQFN32 5x5
XRP7713EVB-DEMO-1-KIT N/A N/A N/A N/A N/A N/A Kit

Click on the links above to download the Certificate of Non-Use of Hazardous Substances.

Additional Quality Documentation may be available, please Contact Support.

Parts & Purchasing

Part Number Pkg Code Min Temp Max Temp Status Suggested Replacement Buy Now Order Samples PDN
XRP7713ILB-F TQFN32 5x5 OBS
XRP7713ILBTR-F TQFN32 5x5 -40 125 Active Order
XR77XXEVB-XCM-V80 Board Active
XRP7713EVB-DEMO-1 Board Active
XRP7713EVB-DEMO-1-KIT Kit Active
Show obsolete parts
Part Status Legend
Active - the part is released for sale, standard product.
EOL (End of Life) - the part is no longer being manufactured, there may or may not be inventory still in stock.
CF (Contact Factory) - the part is still active but customers should check with the factory for availability. Longer lead-times may apply.
PRE (Pre-introduction) - the part has not been introduced or the part number is an early version available for sample only.
OBS (Obsolete) - the part is no longer being manufactured and may not be ordered.
NRND (Not Recommended for New Designs) - the part is not recommended for new designs.

Packaging

Pkg Code Details Quantities Dimensions PDF
TQFN32 5x5
  • JEDEC Reference: MO-220
  • MSL Pb-Free: L2 @ 260ºC
  • MSL SnPb Eutectic: n/a
  • ThetaJA: 22.4ºC/W
  • Bulk Pack Style: Tray
  • Quantity per Bulk Pack: 490
  • Quantity per Reel: 3000
  • Quantity per Tube: n/a
  • Quantity per Tray: 490
  • Reel Size (Dia. x Width x Pitch): 330 x 12 x 8
  • Tape & Reel Unit Orientation: Quadrant 1
  • Dimensions: mm
  • Length: 5.00
  • Width: 5.00
  • Thickness: 0.8
  • Lead Pitch: 0.50

Notifications

Distribution Date Description File
12/12/2018 Product Discontinuation Notice
07/11/2017 Product Discontinuation Notification
01/05/2017 Addition of an alternate qualified location, ANST, China.
12/14/2015 Product Discontinuation Notification
10/25/2010 Datasheet change. Input voltage range as originally defined could not be guaranteed from lot to lot. Additional information & typographical errors.
10/15/2010 Package/Shipping Change: New carrier tape dimension. Standardization.

FAQs & Support

Search our list of FAQs for answers to common technical questions.
For material content, environmental, quality and reliability questions review the Quality tab or visit our Quality page.
For ordering information and general customer service visit our Contact Us page.

Submit a Technical Support Question As a New Question

Visit the product page for the part you are interested in.  The part's status is listed in the Parts & Purchasing section.  You can also view Product Lifecycle and Obsolescence Information including PDNs (Product Discontinuation Notifications).
 
To visit a product page, type the part into the search window on the top of the MaxLinear website.
 
In this example, we searched for XRA1201.  Visit the product page by clicking the part number or visit the orderable parts list by clicking "Orderable Parts". 
 
 
 

 

  

The Parts & Purchasing section of the product page shows the Status of all orderable part numbers for that product.  Click Show obsolete parts, to see all EOL or OBS products.

 
 
 

 

Find the product page of the part that you want to get an evaluation board for and click on Parts & Purchasing. Example:

 

Find the icons under Buy Now or Order Samples:

 
 

Click on the Buy Now icon and see who has stock and click on the Buy button:

 
 
 

Alternatively, you can click on the Order Samples

 
 

If the icons are missing, then contact Customer Support.

For best gate drive performance, it is recommended to route GL_RTN (PGND) together with its GL pin like a differential pair instead of just connecting GL_RTN to GND at the IC and subjecting it to ground noise. Routing them together cancels out any noise, inductive and electromagnetic field effects between these two traces. See ANP-32 Practical Layout Guidelines for PowerXR Designs http://www.exar.com/appnote/anp32 page 8 for more information.

The -F suffix indicates ROHS / Green compliance:
https://www.exar.com/quality-assurance-and-reliability/lead-free-program